Shindaiwa 81359 manual General Maintenance, Daily Maintenance, Hour Maintenance

Page 14

General Maintenance

IMPORTANT!

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTAB- LISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PER- FORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY SHINDAIWA CORPORATION THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE

A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

WARNING!

Before performing any maintenance, repair or cleaning work on the unit, make sure the engine and cutting attachment are completely stopped. Disconnect the spark plug wire before performing service or maintenance work.

WARNING!

Non-standard parts may not operate properly with your unit and may cause damage and lead to personal injury.

NOTE:

Using non-standard replacement parts could invalidate your Shindaiwa warranty.

Muffler

This unit must never be operated with a faulty or missing spark arrester or muffler. Make sure the muffler is well secured and in good condition. A worn or damaged muffler is a fire hazard and may also cause hearing loss.

Spark Plug

Keep the spark plug and wire connections tight and clean.

Fasteners

Make sure nuts, bolts, and screws (except carburetor adjusting screws) are tight.

Blades

Keep blades sharp and check blade condition frequently. If a blade’s perfor- mance changes suddenly, stop the engine and check the blade for cracks or other damage. Replace a damaged blade

IMMEDIATELY!

WARNING!

nNever repair a damaged blade by welding, straightening, or by modify- ing its shape. An altered blade may break during operation, resulting in serious personal injury.

nBlades are not interchangeable between Shindaiwa edgers and trim- mer/brushcutter models. Operating any unit with a blade or attachment not approved for that unit can be haz- ardous and may cause serious injury.

Daily Maintenance

Prior to each work day, perform the following:

nRemove dirt or debris from the engine, check the cooling fins and air cleaner for clogging and clean them as necessary.

nCarefully remove any accumulation of dirt or debris from the muffler or the fuel tank. Dirt build-up in these areas could cause engine overheating, induce premature wear, or create a fire hazard.

nCheck for loose or missing screws or components. Make sure the cutting at- tachment is securely fastened.

nCheck the entire unit for leaking fuel or grease.

10-Hour Maintenance

Unscrew

Remove and

Fastener

clean or replace

 

the element

Figure 26

 

Every 10 hours of operation (more fre- quently in dusty or dirty conditions):

Remove the air cleaner element. See Figure

26.Clean or replace as necessary. To clean element: wash it thoroughly in soap and water. Let it dry before reinstalling the element.

CAUTION!

Do not operate the unit if the air cleaner or element is damaged, or if the element is wet.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents C242 Brushcutter Introduction ContentsSafety Instructions Properly Equipped Operator Always use the proper cutting tool for the jobSafety Labels Be Aware of the Working EnvironmentProduct Description Specifications C242Prior to Assembly Sub-Shield C242 AssemblyCutting Attachment Shield Adjust Throttle Lever Free Play AdjustmentsHandle Bar C242 Install the handlebar Installing a Trimmer Head With the gear case output shaft facingInstalling a Blade Both holders must be flat against the surface of the bladeStarting the Engine Mixing FuelFilling the Fuel Tank Examples of 501 mixing quantitiesWhen the Engine Starts Adjusting Engine IdleCutting attachment may rotate when the engine is started Idle Speed AdjustmentCutting Grass-Units equipped with a trimmer head Checking Unit ConditionShoulder Strap C242 Using a Blade C242 Operating Units with a BladeHour Maintenance General MaintenanceDaily Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operationWith an authorized Shindaiwa servicing DealerShindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladeTroubleshooting Guide Engine does not StartAdditional Problems Emission System Warranty Statement Emisión de Sistema del Garantía de Declaración Continuación Diagnostico Guia Adicionales ProblemasDiagnostico Guia 18SPMúltiples Dientes de Discos Discos de AfiladoPlazo Largo de Almacenamiento Tornado Shindaiwa DiscoDistri o servicio de centro su con consulte Mantenimiento horas 135 CadaShindaiwa autorizado buidor Carbón, de excesiva acumulación nota SiHoras 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoGeneral Mantenimiento Horas 10 Cada MantenimientoDiario Mantenimiento Cuchilla una con Unidades Operando C242 Disco un UsandoUnidad la de Condición la Verifique Corte deCabezal con Equipadas Máquinas Césped de Corte Motor del Parada Motor delMínima Marcha de Ajuste Continuación Motor del ArranqueCombustible de Mezcla Motor del ArranqueCombustible de Tanque el Llenando De proporciónCuchilla la Instalando 9SPNylon de Cabezal del Instalación C242 Mango Continuación EnsamblajeAcelerador del holgura la Ajuste Ajustes Ensamblaje Allen cabezaEnsamblar de Antes C242 EspecificacionesProducto del Descripción Trabajo de Area del Alerta Esté Seguridad de EtiquetasPíes Equipado Debidamente Operario El Seguridad de Instrucciones Limpios mangos los mantenga SiempreHumana reproducción la Nocivos efectos otros u congénitos ContenidoIncendios de Riesgo El Disminuya Alerta MantengaseC242 Desmalezadora

81359 specifications

The Shindaiwa 81359 is a powerful and efficient tool designed for landscaping professionals who seek performance and reliability. This multi-purpose piece of equipment excels in various tasks, including trimming, cutting, and clearing, thus providing an essential addition to any outdoor toolkit.

One of the primary features of the Shindaiwa 81359 is its robust engine. Equipped with a high-performance 25.4cc two-stroke engine, the unit delivers ample power to tackle even the most demanding jobs. This engine is designed for efficiency and durability, ensuring that it can withstand the rigors of daily use in professional environments.

The Shindaiwa 81359 also incorporates advanced technologies to enhance operator experience and productivity. The unit features advanced vibration dampening technology, which significantly reduces the amount of vibration transmitted to the user. This results in increased comfort during prolonged use, minimizing fatigue and allowing for more extended periods of operation without compromising performance.

Another notable characteristic of the Shindaiwa 81359 is its lightweight design. Weighing in at just under 10 pounds, the tool is easy to maneuver, making it suitable for various landscaping tasks. The well-balanced design further aids in reducing strain on the operator, making it an ideal choice for residential or commercial landscaping work.

The cutting capabilities of the Shindaiwa 81359 are impressive, with a user-friendly, easy-to-adjust cutting head that allows for quick changes between different trimmer heads or attachments. This versatility equips the operator to seamlessly shift between different tasks, whether edging, trimming, or clearing thick brush.

Moreover, the Shindaiwa 81359 prioritizes environmental consciousness with its low-emission engine design. This aspect is crucial in today’s eco-aware market, where reducing environmental impact is a priority for many professionals and their clients.

In summary, the Shindaiwa 81359 stands out for its powerful 25.4cc engine, advanced vibration dampening, lightweight, ergonomic design, and versatility in cutting options. Ideal for landscaping professionals, its combination of efficiency and user comfort makes it a top choice for tackling a wide range of outdoor tasks.
Top Page Image Contents