Shindaiwa 68232-94011, EB501EPA2 manual Introduction, Contents

Page 2

INTRODUCTION

IMPORTANT!

Before using this product, consult local regulations concerning noise restrictions and hours of operation!

The Shindaiwa EB501 has been designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety, or durability.

Shindaiwa high performance engines represent the leading edge of 2-cycle engine technology, and deliver exceptionally high power at remark- ably low displacement and weight. As a professional owner/operator, you’ll soon discover why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in this manual describes machines available at the time of production. While every attempt has been made to give you the very latest information about your Shindaiwa EB501 blower, there may be some differences between your machine and what is described here. Shindaiwa Inc. reserves the right to make changes in production without prior notice, and without obligation to make alterations to machines previ- ously manufactured.

CONTENTS

 

 

PAGE

Attention Statements

2

Nomenclature

3

Specifications

4

Assembling the Blower

4

Mixing Fuel

6

Filling the Fuel Tank

7

Starting and Stopping the Blower

8

Adjusting Engine Idle Speed

10

Adjusting the Harness

11

Using the Blower

12

Routine Maintenance

13

Spark Arrester Maintenance

15

Storage

16

Troubleshooting Guide

17

Emission System Warranty

21

CAUTION!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other repro- ductive harm.

CAUTION!

This EB501 blower is equipped with a spark-arresting muffler! Never operate this machine without both the muffler and spark arrester installed and properly functioning!

1

Image 2
Contents EB501 Blower Contents IntroductionPage Nomenclature Specifications Assembling the BlowerTubes and nozzle are correctly Blower tube installation affects blowerBalance and performance! Make sure Assembled per above, and that all Connections are tightMixing Fuel Fuel RequirementsFilling the Fuel Tank InjuryStarting and Stopping the Blower Engine cover will be hot after blower operationWhen the Engine Starts Adjusting Engine Idle Speed Adjusting the Harness Using the Blower Operating TipsRoutine Maintenance Every 10 Hours Direct the air stream at the inside face of the filter onlyEvery 50 Hours Do not nick or perforate fuel tube with wire hookEvery 10/15 Hours More frequently if reduced performance is notedHour Maintenance Every 135 hours of operationStorage 30 days or longer Troubleshooting Guide Troubleshooting Guide Additional Problems Troubleshooting Guide Manufacturers Warranty Coverage Maintenance and Repair Requirements