Shindaiwa EB501EPA2, 68232-94011 manual

Page 24

Shindaiwa Inc.

11975 S.W. Herman Rd.

Tualatin, Oregon 97062 USA

Telephone: 503 692-3070

Fax:	503 692-6696

www.shindaiwa.com

Shindaiwa Corporation

Head Office:

6-2-11, Ozuka-Nishi

Asaminami-Ku, Hiroshima

731-3167, Japan

Telephone: 81-82-849-2220

Fax: 81-82-849-2481

© 2006 Shindaiwa, Inc. Part Number 68232-94011 Printed in Japan

Shindaiwa is a registered trademark of Shindaiwa, Inc.

Specifications subject to change without notice.

Image 24

Contents EB501 Blower Contents IntroductionPage Nomenclature Specifications Assembling the BlowerBlower tube installation affects blower Balance and performance! Make sureTubes and nozzle are correctly Assembled per above, and that all Connections are tightMixing Fuel Fuel RequirementsFilling the Fuel Tank InjuryStarting and Stopping the Blower Engine cover will be hot after blower operationWhen the Engine Starts Adjusting Engine Idle Speed Adjusting the Harness Using the Blower Operating TipsRoutine Maintenance Every 10 Hours Direct the air stream at the inside face of the filter onlyDo not nick or perforate fuel tube with wire hook Every 10/15 HoursEvery 50 Hours More frequently if reduced performance is notedHour Maintenance Every 135 hours of operationStorage 30 days or longer Troubleshooting Guide Troubleshooting Guide Additional Problems Troubleshooting Guide Manufacturers Warranty Coverage Maintenance and Repair Requirements