Shindaiwa EB501EPA2, 68232-94011 manual Adjusting the Harness

Page 12

ADJUSTING THE HARNESS

The Shindaiwa EB501 Blower features an advanced harness system that helps ensure maximum operator comfort and ease of operation.

nThe shoulder harness is filled with soft padding for reduced operator fatigue.

nThe simplified adjustment system makes it easy to match the harness to every body size and type. See figure 10.

The adjusting strap lets the user	Adjusting Strap	Adjustment Holes
determine how far apart the
upper harness loops are
positioned. Easy to
customize for maximum
comfort.

Comfortable

Back Pad

48019

Pull on the loops to

quickly tighten the har-

ness straps

Quick-disconnect	Quick-adjust
Spring Hook	Quick-adjust
	Buckle
To tighten straps…		To loosen straps…
	Quick-adjust	Pull the
	Quick-adjust	quick-
	Buckle	adjust
		buckles
Pull strap		up…
Pull strap
loops down
		…and
	48019A	pull the
		straps	48019B
Figure 10		down.
Figure 10

11

Image 12

Contents EB501 Blower Contents IntroductionPage Nomenclature Specifications Assembling the BlowerBlower tube installation affects blower Balance and performance! Make sureTubes and nozzle are correctly Assembled per above, and that all Connections are tightMixing Fuel Fuel RequirementsFilling the Fuel Tank InjuryStarting and Stopping the Blower Engine cover will be hot after blower operationWhen the Engine Starts Adjusting Engine Idle Speed Adjusting the Harness Using the Blower Operating TipsRoutine Maintenance Every 10 Hours Direct the air stream at the inside face of the filter onlyDo not nick or perforate fuel tube with wire hook Every 10/15 HoursEvery 50 Hours More frequently if reduced performance is notedHour Maintenance Every 135 hours of operationStorage 30 days or longer Troubleshooting Guide Troubleshooting Guide Additional Problems Troubleshooting Guide Manufacturers Warranty Coverage Maintenance and Repair Requirements