Servis-Rhino 5211 manual Standard Equipment and Specifications

OPERATION

1.Standard Equipment and Specifications

Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a loader equipped with 72” material bucket operated with an average tractor hydraulic system of 16.5 GPM with engine operating at 2200 RPM and control valve relief setting of 2900 PSI.

Horsepower Range		75-120 HP
System pressure/flow rate		2750 PSI/ 16.5 GPM
Lift Capacity to maximum height		3500 lbs.
Breakout force at pivot pin		6405 lbs.
Rollback force at ground line		5105 lbs.
Total weight with bucket (approx.)		2438 lbs.
Hydraulic system flow		16.5 GPM
System pressure at rated flow		2750 PSI
(A)	Maximum Lift Height at Pivot Pin	136”
(B)	Clearance with Bucket Dumped	99”
(C)	Reach at Maximum Height	60”
(D)	Maximum Dump Angle	60°
(E)	Reach with Attachment on Ground	88”
(F)	Attachment Rollback Angle	37°
(G)	Digging Depth	5.5”
(H)	Overall Height in Carry Position	70”

(Manufacturers estimated specifications and design subject to change without notice.)

5211 01/11 Operation Section 4-3

© 2011 Alamo Group Inc.

OPERATION