Servis-Rhino DM82, DM124, DM95, DM112 manual Assembly

Page 72

ASSEMBLY

CAUTION! WEAR PROPER PROTECTIVE EQUIPMENT SUCH AS SAFETY GLASSES AND PROTECTIVE SHOES WHEN ASSEMBLING THE MOWER. USE OVERHEAD CRANE OR HOIST.

See pages 6-1 through 6-22 in the Parts List Section and identify the components to be installed. When the instructions refer to the left or right side, they refer to your left or right side, as you are standing behind the mower and facing the tractor. Refer to Torque Chart on Page 5-6 for correct torque on all bolts.

The Rhino Disc Mower is shipped partially assembled. Refer to the parts

 

lists for the location of the parts.

Figure 1

1. Unpack the main frame and fold the frame away from the cutter bar. (See Figure 1.)

CAUTION! BLOCKS SHOULD BE PLACED UNDER THE MAIN FRAME AND CUTTER BAR DURING ASSEMBLY TO ADD STABILITY AND REDUCE THE CHANCE OF PERSONAL INJURY.

2.Attach the 3-point frame to the main frame as shown in illustration 2 using the mainframe pin and two roll pins(B). Make sure the parts are clean and well lubricated.

3.Install the Stand Tube (A) in the 3-point frame and secure with the lock pin(C). (See Figure 2.)

4.Attach the suspension spring and suspension tube

assembly to the main frame and 3-point frame using a Short Suspension Tube Pin (B) at the main frame and a Suspension Rod Pin (C) at the 3-point frame. Secure both pins with cotter pins. (See Figure 3.)

5.Install the Break Away Slide (D) into the rear clevis of the 3-point frame as shown in illustration 4. Secure with a pin and cotter pin as shown.

Figure 2

Figure 3

DM 07-02

Assembly Section 3-2

© 2004 Alamo Group Inc.

Image 72
Contents Disc Mower To the OWNER/OPERATOR/DEALER Safety Training Makes the Difference Page Table of Contents Table of Contents Safety Section Safety ¡LEA EL Instructivo Prolonged Exposure to Loud Noise MAY Cause PER Following rules Drugs or alcohol. SG-27 Alamo Group Inc Stop Mowing if Passersby are Within 50 Yards Unless Wait a minute...Save a life See Your SERVIS-RHINO Dealer Safety Section 3027 QTY Level Description Safety Section 05-05-99 25 D301 Front Cover Safety Section 05-18-99 DM82 DM95 DM112 DM124 22 D103 Safety Section Safety Federal Laws and Regulations Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Introduction Section Introduction Assembly Section Assembly Assembly Assembly Assembly Quarts Operation Section Operation IID Shaft Installation Adjusting Shaft Length Operation Adjusting Mowing Height Belt Tension Adjustment Swath Board Transporting the Mower Transport Lock Operation Special Operating Instructions Page Maintenance Section Maintenance Maintenance Lubrication Maintenance Gearbox Section END View Proper Torque for Fasteners Optional Equipment Specifications Page SERVIS-RHINO To the OWNER/OPERATOR/DEALER Disc Mower RHINO-SERVIS SERVIS-RHINOWARRANTY Registration Information Page Dealer Copy Page Customer Copy