WASHER
COMPONENT IDENTIFICATION
Gasoline
Tank
OPERATOR’S MANUAL PRESSURE
| Detergent | |
| Injector | |
Collar | Discharge | |
Nipple | ||
| ||
| Quick | |
| Coupler |
Spray Gun
Swivel
Connector
Trigger
High Pressure
Hose
Pressure
Switch
Unloader
Water Supply
Hose
(not included)
Pump
Battery Box
Wand
Coupler
| Nozzle |
| Quick |
| Coupler |
| Brass |
Variable Pressure | Soap |
Control wand | Nozzle |
Control Wand
Handle
6
Pump — Develops high pressure.
Starter Grip — (Not Shown) Used for starting the engine manually.
Spray Gun — Controls the application of water and detergent onto cleaning surface with trigger device. Includes safety latch.
Detergent Injector — Allows you to siphon and mix detergents.
Variable Pressure Control Wand — Must be con- nected to the spray gun. This wand handle controls dishcharge flow from one tube to both wand tubes. When water is discharged from both tubes you will have a pressure loss and allows chemical siphoning when used in combination with a detergent injector.
High Pressure Hose — Connect one end to water pump discharge nipple and the other end to spray gun.
Note: If trigger on spray gun is released for more than 2 minutes, water will leak from valve. Warm water will discharge from pump protector onto floor. This system prevents internal pump damage.