Sharp IG-BC2J operation manual Troubleshooting, Problem, What To Do

Page 14

TROUBLESHOOTING

TROUBLESHOOTING

Problem

The Plasmacluster Ion Generator does not work.

WHAT TO DO

•Is a Car Adapter connected properly? Please be connected deﬁnitely.

•Does not a fuse blow?

Replace with a new fuse. (See E-11)

Flashing

FILTER CLEAN

It is over the exchange period of Plasmacluster Ion Generating Unit.

Replace with new Plasmacluster Ion Generating

faster (red) UNIT

UNIT

Flashing (red) Flashing (blue)

UNIT

Flashing (blue)

Other indication.

A discontinuous noise is heard. A clicking or ticking sound comes from the unit.

The air ﬂow decreases.

The discharged air has odor.

Unit. (See E-10)

Plasmacluster Ions are not released. Press the Mode Button and restart. Clean the electrode section of the unit. (See E-9)

Is the unit installed correclly?

Remove the unit, fully inserted again and press the Mode button.

Failure

Unplug and contact the store you purchased or Sharp Service Center.

•Clicking or ticking sounds may be audible when the unit is generating ions.

•Dust may block the ﬁlter, clean the ﬁlter. (See E-8)

•Wind quantity sometimes becomes strong during operation with LOW mode, to conﬁrm the condition of ion be not abnormal.

•Filter is getting dirty. Clean the ﬁlter. (See E-8)

•The Plasmacluster Ion Generator releases a small trace of ozone which may produce odor. This is not detrimental to health.

E-12

Image 14

Contents IG-BC2J ENGLISHPage CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...............E-2PLASMACLUSTER ION GENERATING UNIT REPLACEMENT.. E-10 TROUBLESHOOTINGWARNINGS - To reduce the risk of electric shock, ﬁre or injury IMPORTANT SAFETY INSTRUCTIONSPlease read instructions carefully before using this unit as below CAUTIONS CONCERNING OPERATION Power Input Terminal Filter Cover Reset ButtonFilter Clean Light PARTS NAME1 Remove the ﬁlter cover INSTALLATION GUIDANCEConnecting the car adapter and installing the unit Cautions on installation 4 Insert the cigar plug into the cigar lighter socketCautions on wiring the car adapter HIGH OPERATIONTo select the preferred mode Press2 Press the Reset Button for at least 3 seconds CLEANING AND MAINTENANCEFILTER Filter Clean LightMAIN UNIT Every month or more often if necessary Plasmacluster Ion Generating Unit electrode sectionAFTER THE UNIT MAINTENANCE If Plasmacluster ions are not releasedFor Disposal Replacement of Plasmacluster Ion Generating UnitPLASMACLUSTER ION GENERATING UNIT REPLACEMENT REPLACING THE FUSE SPECIFICATIONSHOW TO REPLACE 1 Turn the tip of the cigar plug and remove itWHAT TO DO TROUBLESHOOTINGProblem 1. In the European Union INFORMATION ON DISPOSALA. Information on Disposal for Users private households 2. In other Countries outside the EUWARRANTY WARRANTY PERIODSCongratulations on Your Purchase Consumer Electronic ProductsSHARP APPROVED SERVICE CENTRE SHARP CUSTOMER SERVICESAUSTRALIA 1300MEMO SHARP CORPORATION OF NEW ZEALAND LIMITED SHARP ELECTRONICS Europe GmbHA. B. N 4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ