Sharp IG-BC2J operation manual Important Safety Instructions

Page 4
IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Please read instructions carefully before using this unit as below.

When using electrical appliances, basic safety precautions should be followed, including the following:

WARNINGS - To reduce the risk of electric shock, fire or injury :

Do not operate switches while driving. (Doing so could lead to accidents.)

Do not install the unit in places where it could hamper visibility to the front or driving operations, or in places where it could be dangerous to passengers. (Doing so could lead to accidents or injury.)

Do not put in places exposed to direct sunlight. (Do so could cause warping or malfunction.)

This unit is designed exclusively for use in vehicles with 12V batteries. Do not use it in other vehicles. Do not use the unit in large trucks, buses or other vehicles with 24V batteries. (Doing so could lead to fire or electric shock.)

Do not damage or modify the cord. Also, do not use the cord if it is damaged.

(The damaged section could cause short-circuiting and the cord could melt, leading to fire.) If the cord is damaged, contact your store of purchase.

Do not pull on the cord when unplugging the cigar plug or the unit connection plug. (Doing so could damage the cord, leading to fire or electric shock.)

Do not plug in or unplug the cigar plug or the unit connection plug with wet hands. (Doing so could cause electric shock.)

When transporting, be careful not to drop the unit or subject it to shocks. (Doing so could cause injury or damage.)

If the unit should drop or get damaged, contact your store of purchase. Continued usage as such could lead to fire or electric shock.

Do not modify the unit. Also, no one other than an authorized repairman should take apart or repair the unit. (Doing so could lead to fire, electric shock or injury.)

Contact your store of purchase for repairs.

Do not spill beverages or drop cigarette ashes, metal objects, easily burnable objects, etc., into the unit through the air outlet or air intake.

Be particularly careful if there are small children in your family. If water or foreign substances should get inside the unit, unplug the cigar plug from the cigar lighter socket. (Continued usage as such could lead to fire or electric shock.)

Contact your store of purchase.

Do not wipe the unit with oils, alcohol, benzene or thinner, or spray hairspray or insecticides on the unit.

If such substances should get on the unit, wipe them off immediately.

(Such substances could lead to cracking or electric shock or could catch fire.)

Use the car adapter designed exclusively for this unit, and insert the cigar plug securely all the way in until it stops.

(If the cigar plug is not inserted securely until it stops, it could heat up, deforming the cigar lighter socket, and this could lead to fire.)

If the fuse should blow, be sure to replace it with a 5A glass tube fuse (commercially available). Never use a piece of wire, etc., in place of the fuse.

(Using anything other than the specified type of fuse could cause heating, leading to fire.)

Be sure to unplug the cigar plug from the cigar lighter socket when cleaning. (Failure to do so could cause electric shock or injury.)

E-2

Image 4
Contents IG-BC2J ENGLISHPage IMPORTANT SAFETY INSTRUCTIONS ...............E-2 PLASMACLUSTER ION GENERATING UNIT REPLACEMENT.. E-10CONTENTS TROUBLESHOOTINGPlease read instructions carefully before using this unit as below IMPORTANT SAFETY INSTRUCTIONSWARNINGS - To reduce the risk of electric shock, fire or injury CAUTIONS CONCERNING OPERATION Reset Button Filter Clean LightPower Input Terminal Filter Cover PARTS NAMEConnecting the car adapter and installing the unit INSTALLATION GUIDANCE1 Remove the filter cover Cautions on wiring the car adapter 4 Insert the cigar plug into the cigar lighter socketCautions on installation OPERATION To select the preferred modeHIGH PressCLEANING AND MAINTENANCE FILTER2 Press the Reset Button for at least 3 seconds Filter Clean LightPlasmacluster Ion Generating Unit electrode section AFTER THE UNIT MAINTENANCEMAIN UNIT Every month or more often if necessary If Plasmacluster ions are not releasedPLASMACLUSTER ION GENERATING UNIT REPLACEMENT Replacement of Plasmacluster Ion Generating UnitFor Disposal SPECIFICATIONS HOW TO REPLACEREPLACING THE FUSE 1 Turn the tip of the cigar plug and remove itProblem TROUBLESHOOTINGWHAT TO DO INFORMATION ON DISPOSAL A. Information on Disposal for Users private households1. In the European Union 2. In other Countries outside the EUWARRANTY PERIODS Congratulations on Your PurchaseWARRANTY Consumer Electronic ProductsSHARP CUSTOMER SERVICES AUSTRALIASHARP APPROVED SERVICE CENTRE 1300MEMO SHARP ELECTRONICS Europe GmbH A. B. NSHARP CORPORATION OF NEW ZEALAND LIMITED 4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ