Sharp IG-BC2J operation manual Cautions Concerning Operation, English

Page 5
CAUTIONS CONCERNING OPERATION:

•Be sure to unplug the cigar plug from the cigar lighter socket when not using the unit for long periods of time. (Failure to do so could lead to electric shock or fire caused by short- circuiting.)

•If the cigar lighter socket is integrated into the ashtray, be sure that cigarettes are completely put out before using.

When leaving the vehicle, unplug the cigar plug and close the ashtray’s lid. (Failure to do so could lead to fire caused by the smoldering cigarettes.)

CAUTIONS CONCERNING OPERATION:

•Do not touch the metal parts of the car adapter’s cigar plug (or of the cigar lighter socket).

(The metal parts of the cigar plug could be hot directly after the car is stopped, and could cause burns if touched.)

•Do not use the unit in commercially available cup holders, on shaky or non-level surfaces or in other unstable places. (The unit could fall, resulting in injury or damage.)

•Move the unit out of the car when using room fumigating type insecticides or deodorizers.

If not, the chemicals could get inside the unit and later be ejected from the air outlet, possibly harming your health.

•If the unit risks falling out of the cup holder (when driving on rough roads, over bumps, etc.), either slow down or remove the unit from the cup holder beforehand.

(Failure to do so could cause injury or damage to the unit.)

•Do not use items of silicone-containing products* near the unit.

The fluororesin or silicone could get stuck inside the unit, preventing it from producing plasmacluster ions.

If this happens, remove the dust from the electrode section of the Plasmacluster Ion Generating Unit. (See E-9)

*Hair care products (split end coatings, hair mousses, hair treatments, etc.), cosmetics, antiperspirants, antistatic agents, waterproofing sprays, polishes, glass cleaners, chemical- impregnated clothes, wax, etc.

ENGLISH

E-3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ENGLISH IG-BC2JPage PLASMACLUSTER ION GENERATING UNIT REPLACEMENT.. E-10 IMPORTANT SAFETY INSTRUCTIONS ...............E-2CONTENTS TROUBLESHOOTINGWARNINGS - To reduce the risk of electric shock, fire or injury IMPORTANT SAFETY INSTRUCTIONSPlease read instructions carefully before using this unit as below CAUTIONS CONCERNING OPERATION Filter Clean Light Reset ButtonPower Input Terminal Filter Cover PARTS NAME1 Remove the filter cover INSTALLATION GUIDANCEConnecting the car adapter and installing the unit Cautions on installation 4 Insert the cigar plug into the cigar lighter socketCautions on wiring the car adapter To select the preferred mode OPERATIONHIGH PressFILTER CLEANING AND MAINTENANCE2 Press the Reset Button for at least 3 seconds Filter Clean LightAFTER THE UNIT MAINTENANCE Plasmacluster Ion Generating Unit electrode sectionMAIN UNIT Every month or more often if necessary If Plasmacluster ions are not releasedFor Disposal Replacement of Plasmacluster Ion Generating UnitPLASMACLUSTER ION GENERATING UNIT REPLACEMENT HOW TO REPLACE SPECIFICATIONSREPLACING THE FUSE 1 Turn the tip of the cigar plug and remove itWHAT TO DO TROUBLESHOOTINGProblem A. Information on Disposal for Users private households INFORMATION ON DISPOSAL1. In the European Union 2. In other Countries outside the EUCongratulations on Your Purchase WARRANTY PERIODSWARRANTY Consumer Electronic ProductsAUSTRALIA SHARP CUSTOMER SERVICESSHARP APPROVED SERVICE CENTRE 1300MEMO A. B. N SHARP ELECTRONICS Europe GmbHSHARP CORPORATION OF NEW ZEALAND LIMITED 4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ
Top Page Image Contents