OPERATING MOWER
Engaging Mower
IMPORTANT: Operate mower at HIGH IDLE/ Mowing (a) when mowing or after mower blades are engaged.
Machine may require
1. START engine.
Picture Note: Model S2554 shown for photo purposes.
2.Move throttle lever (A) to the FAST (r) position.
3.Lower mower to cutting height.
4.Pull PTO switch (B) up to ENGAGE mower.
NOTE: Any operating attachment and the engine will stop as the REVERSE foot pedal is depressed with attachment engaged.
5. Disengage PTO before shifting to REVERSE.
Disengaging Mower
Push PTO switch (A) down to DISENGAGE mower.
Picture Note: Model S2554 shown for photo purposes.
If you hit an object with mower while mowing, STOP mower and engine immediately. Inspect mower for damage.
Dismounting to Inspect or Unplug Mower or Optional Bagger
cCAUTION: To help prevent personal injury, do the following steps before you dismount to inspect or unplug mower or bagger.
1.STOP machine.
2.Push PTO switch down to DISENGAGE mower.
3.Move throttle lever to SLOW (t) position.
4.Lower mower to the ground.
5.LOCK park brake.
6.STOP engine.
7.Remove key.
8.Wait for all moving parts to STOP.
A
B
M97151
A
M97151
Operating Mower - Page 31