SERVICE ELECTRICAL
cCAUTION: DO NOT attempt to open, add fluid or service battery. Any attempt to do so will void warranty and lead to possible injury.
Battery gas is explosive:
-DO NOT smoke while you charge battery.
-Keep all flames and sparks away.
-DO NOT charge frozen battery.
-DO NOT connect booster battery negative
1.Remove battery from mower. (See Removing and Installing Battery in this section.)
2.Connect positive (+) charger cable to positive (+) battery terminal.
3.Connect negative
4.Plug in charger cord.
5.Charge battery using a 12 Volt battery charger at a rate of
6.Unplug charger cord. Remove charger cables.
7.Install battery. (See Removing and Installing Battery in this section.)
Using Booster Battery
cCAUTION: Battery gas is explosive:
-DO NOT smoke while you charge battery.
-Keep all flames and sparks away.
-DO NOT charge frozen battery.
-DO NOT connect booster battery negative
1.Connect positive (+) booster cable to booster battery positive (+) post (D).
2.Connect the other end of positive (+) booster cable to vehicle battery positive (+) post (A).
3.Connect negative
4.Connect the other end of negative
(B) to engine ground away from battery.
TO ENGINE | B |
|
|
| |
GROUND |
|
|
A | C | D |
| ||
VEHICLE | BOOSTER | |
BATTERY | BATTERY |
Service Electrical - Page 52