Scotts S2048, S2554 manual Changing Engine Oil Filter

Page 46

SERVICE ENGINE

8.Install dipstick and then remove to check oil level. (See Checking Engine Oil in this section.) Oil level must be between ADD and FULL marks. Do not overfill.

9.Install and tighten dipstick.

10.Start engine and check for oil leaks. Correct any leaks before operating.

Changing Engine Oil Filter

cCAUTION: Hot Engine and Hot Oil can cause severe burns. Allow engine temperature to drop from hot to warm level before attempting to change oil and filter.

To prevent accidental starting, remove wire from spark plugs and disconnect battery at negative terminal before servicing engine.

1.Park tractor on level surface. STOP engine, LOCK park brake and remove key.

2.Drain engine oil and replace with fresh oil. (See Changing Engine Oil in this section.)

3.Wipe debris and dirt from around oil filter.

4.Put a small shallow pan or funnel under oil filter (A) to catch oil drained from filter.

Picture Note: Model S2048 used for photo purposes.

5.Remove old filter (A) and wipe off filter tray with a clean cloth.

6.Lightly oil filter gasket with fresh, clean oil.

7.Install replacement oil filter. Turn oil filter to the right (clockwise) until rubber gasket contacts filter adapter. Tighten filter an additional one-half turn.

8.Start and run engine at idle to check for leaks. Stop engine.

9.Check oil level. (See Checking Engine Oil Level in this section.)

10.Add oil if required. (See Engine Oil in this section.)

A

M97158

Service Engine - Page 40

Image 46

Contents OPERATOR’S Manual Introduction Thank YOU for purchasing a Scotts productTable of Contents Page Page Page Identify Parts AssemblyCheck and Connect Battery Clear Plastic Bag ContainsInstall Steering Wheel Connect BatteryCheck Engine Oil Break-In Electric PTO ClutchChecking Tire Pressure Check Machine Safety SystemTire Size Pressure Safety-Alert Symbol Safety SignsMachine Safety Labels Loaded Spring Certification Label Thrown ObjectsControls ControlsOperate Safely Operating MachinePark Safely Protect Children Avoid Tipping Keep Riders OffWear Appropriate Clothing Adjusting SeatTransport Safely Using the Park Brake Using HeadlightsChecking Indicator Lights and Hour Meter Starting EngineWarming and Idling Engine Stopping EngineTo Travel in Reverse Using and Stopping Automatic TransmissionTo Travel Forward For Emergency StoppingPushing Machine Important Avoid transmission damage, do not tow machineUsing Reverse Implement Option Daily Operating ChecklistTesting Safety Systems TestOperating Machine Operator on seat Push brake pedal a down Avoid Damage to Plastic and Painted Surfaces Using Front Weights Avoid Using Ground Engaging Equipment Model S2048 OnlyUsing Rear Wheel Weights Installing the Chains Transporting Check Ground Conditions Operating MowerOperating Mower Safely Avoid Injury From Contacting BladesUsing Lift Lever to Raise and Lower Mower Adjusting Cutting HeightAdjusting Mower Gage Wheels Adjusting Mower Level Side-to-SideM40434 M40161 M88586 Adjusting Mower Level Front-to-Rear Disengaging Mower Engaging MowerDismounting to Inspect or Unplug Mower or Optional Bagger Replacement Parts Parts for Tractor and Mower DeckService Machine Safely Practice Safe MaintenanceHandling Waste Product and Chemicals Service Interval Chart Service IntervalsService Record Before StorageEngine Warranty Maintenance Statement Service EngineAdjusting Carburetor Avoid Fumes Engine OilChecking Engine Oil Level Changing Engine OilChanging Engine Oil Filter Cleaning Air Intake Screen and Engine Fins Checking and Cleaning Air Cleaner ElementsM88594 Checking Spark Plugs Replacing Fuel FilterCheck Transmission Fluid Level Service TransmissionTransmission Oil Adding Transmission FluidGrease Service MowerLubricating Mower Spindles Replacing Mower Drive Belt Servicing Mower Blades Removing Mower BladesSharpening Blades Balancing BladesChecking the Battery Service ElectricalRemoving and Installing the Battery Clean Battery and Terminals Charging the Battery Stop to prevent charging the batteryUsing Booster Battery Replacing Fuse Replacing Headlight BulbService Miscellaneous Fuel Fuel Blends Octane RatingOxygenated or Reformulated Fuels Using Fresh Fuel and Stabilizers Filling Fuel Tank50C 122F 40C 104F 30C 86F Care for Plastic and Painted Surfaces Plastic SurfacesRepair Avoid DamagePainted Metal Surfaces RepairRemoving Mower Removing MowerM97162 Installing Mower Installing MowerUsing Troubleshooting Chart TroubleshootingEngine Troubleshooting Tractor ElectricalMower Troubleshooting Storing Safely Storing MachinePreparing Machine for Storage Add fuel and stabilizer mixture to tank Preparing Engine For StorageRunning engine dry of fuel Preparing EngineRemoving Machine From Storage Engine Automatic-S2048 SpecificationsEngine Automatic-S2554 Dimensions-Model S2554 Dimensions-Model S2048Tires Mower Deck 48-inch Recommended LubricantsWarranty Limited Warranty for NEW Scotts Brand ProductsWarranty Tire Warranty Limited Engine WarrantyWarranted Parts Consequential Warranty Coverage Limited Battery Warranty Warranty Code Warranty PeriodIndex Grease Reverse Implement Option, Using Wheels, Adjusting Mower Wheels, Adjusting Mower Gage Page Scotts Service Literature Title Number Price Qty TotalPage Refer to your operator’s manual Investment in QualityStep Contact your dealer