Tanaka TPS-2501 Chain oil filter -2C, Spark plug Fig, Muffler Fig, Cylinder Engine cooling Fig

Page 12

TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Owner’s Manual

Fuel Filter (Fig. 3-2B)

Drain all fuel from fuel tank and pull fuel filter line from tank. Pull filter element out of holder assembly. Replace filter if it appears to be discolored or hardened from use. The filter has a white, felt-like appearance when new.

Chain oil filter (Fig. 3-2C)

Remove the oil filter and thoroughly wash it in solvent.

Spark plug (Fig. 3-3)

The spark plug condition is influenced by:

An incorrect carburetor setting.

Wrong fuel mixture (too much oil in the gasoline)

A dirty air filter.

Hard running conditions (such as cold weather).

These factors cause deposits on the spark plug electrodes, which may result in malfunction and starting difficulties. If the engine is low on power, difficult to start or runs poorly at idling speed, always check the spark plug first. If the spark plug is dirty, clean it and check the electrode gap. Readjust if necessary. The correct gap is 0.6 mm (.024”). The spark plug should be replaced after about 100 operation hours or earlier if the electrodes are badly eroded.

NOTE!

In some areas, local law requires using a resistor spark plug to suppress ignition signals. If this machine was originally equipped with resistor spark plug, use same type of spark plug for replacement.

Muffler (Fig. 3-4)

Remove the muffler and remove excess carbon from the exhaust port or muffler inlet every 100 hours of operation.

Cylinder (Engine cooling) (Fig. 3-5)

The engine is air cooled, and air must circulate freely around engine and over cooling fins on cylinder head to prevent overheating.

Every 100 Operating hours, or once a year (more often if conditions require), clean fins and external surfaces of engine of dust, dirt and oil deposits which can contribute to improper cooling.

NOTE!

Do not operate engine with engine shroud or muffler guard removed as this will cause overheating and engine damage.

www.tanaka-usa.com

11

custsvc@tanaka-ism.com

Image 12
Contents TPS-250PF/PN,TPS-270PF/PN Before using this unit Custsvc@tanaka-ism.com Operator Safety Assembly procedures Throttle wire/stop cordInstallation of handle Fig Drive shaft to engineInstallation of bar and chain Proper Tension is Extremely IMPORTANT! -11Operating procedures Fuel Fig FuelFueling Adjustment of Chain OIL Supply Chain OIL FigStarting Fig Stopping FigPruning techniques Safe OperationMaintenance Carburetor adjustment FigIdle speed adjustment T Cleaning the air filterChain oil filter -2C Spark plug FigMuffler Fig Cylinder Engine cooling FigOiler port Fig Guide bar FigSide case Fig Angle transmission -4Chain Sharpening Maintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceSpecifications Declaration of conformity

TPS-250PN, TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN, TPS-2510, TPS-2510, TPS-250PF/PN, TPS-270PF/PN, TPS-2501 specifications

The Tanaka TPS series represents a line of advanced technological tools designed for efficient and precision-driven operations across various industrial applications. Among the notable models are the TPS-250PN, TPS-2501, TPS-2510, TPS-250PF/PN, and TPS-270PF/PN. Each model embodies unique features tailored to enhance productivity and user experience.

The TPS-250PN stands out for its robust construction and reliability, making it suitable for heavy-duty tasks. It is equipped with a powerful motor that ensures consistent performance even under demanding conditions. The lightweight design facilitates maneuverability, allowing operators to work with ease over prolonged periods.

The TPS-2501 emphasizes versatility, combining various functionalities into a single unit. It incorporates advanced control technologies, enabling precise adjustments suited for different materials and applications. The intuitive interface enhances user engagement and adaptability, making it an ideal choice for both professionals and novices in various sectors.

Meanwhile, the TPS-2510 showcases an advanced safety mechanism, minimizing risks during operation. Its ergonomic design reduces strain on the user's body, contributing to a safer working environment. Enhanced energy efficiency is another hallmark of the TPS-2510, allowing for extended working hours without excessive energy consumption.

The TPS-250PF/PN model integrates innovative feedback systems that monitor performance in real time. Such technology not only optimizes productivity but also provides valuable data for future operational improvements. This predictive capability helps in reducing downtime and maintenance costs, further enhancing overall efficiency.

On the other hand, the TPS-270PF/PN excels in specialized applications, providing high precision and effectiveness in operations that require meticulous attention to detail. This model is particularly valued in sectors like manufacturing and construction, where exact measurements are crucial.

Overall, the Tanaka TPS series, with its varied models including TPS-250PN, TPS-2501, TPS-2510, TPS-250PF/PN, and TPS-270PF/PN, offers state-of-the-art solutions marked by cutting-edge technologies, user-friendly designs, and enhanced safety features. Whether for heavy-duty tasks or precision operations, these tools are engineered to meet the diverse needs of modern-day industries, reinforcing Tanaka's commitment to quality and innovation.