Tanaka TPS-250PN, TPS-2501 Assembly procedures, Throttle wire/stop cord, Drive shaft to engine

Page 5

TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Owner’s Manual

3. Assembly procedures

Drive shaft to engine (Fig. 1 -1)

Loosen tube locking bolt (1) about ten turns so that the bolt point will not obstruct drive shaft tube to be inserted. When inserting drive shaft tube, hold the tube locking bolt outward preventing inside fitting from obstructing as well.

Insert the drive shaft into the clutch case of the engine properly until the marked position (2) on the drive shaft tube meets the clutch case.

NOTE!

When it is hard to insert drive shaft up to the marked position on the drive shaft tube, turn drive shaft by the cutter mounting end clockwise or counterclockwise. Tighten tube locking bolt lining up the hole in the shaft tube.

Then tighten clamp bolt securely (3).

Cutting attachment to drive shaft (Fig. 1-2)

Loosen tube locking bolt (1).

Insert the drive shaft into the gear case of the attachment properly until the marked position (2) on the drive shaft tube meets the gear case.

NOTE!

When it is hard to insert drive shaft up to the marked position on the drive shaft tube, turn attachment clockwise or counterclockwise.

Tighten tube locking bolt lining up the hole in the shaft tube. Then tighten clamp bolt securely (3).

Installation of handle (Fig. 1-3)

Attach the handle to the drive shaft tube with the angle towards the engine.

Adjust the location to the most comfortable position before operation.

Throttle wire/stop cord

Remove air cleaner cover. (Fig. 1-4) Connect stop cords. (Fig.1 -5)

Connect throttle wire end to carburetor. (Fig. 1 -6)

Cover throttle wire and stop cords together with protective tube provided up to air cleaner cover. (Fig. 1 -7)

www.tanaka-usa.com

4

custsvc@tanaka-ism.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TPS-250PF/PN,TPS-270PF/PN Before using this unit Custsvc@tanaka-ism.com Operator Safety Throttle wire/stop cord Assembly proceduresInstallation of handle Fig Drive shaft to engineProper Tension is Extremely IMPORTANT! -11 Installation of bar and chainFueling Operating procedures Fuel FigFuel Chain OIL Fig Adjustment of Chain OIL SupplyStopping Fig Starting FigSafe Operation Pruning techniquesCarburetor adjustment Fig MaintenanceIdle speed adjustment T Cleaning the air filterSpark plug Fig Chain oil filter -2CMuffler Fig Cylinder Engine cooling FigGuide bar Fig Oiler port FigSide case Fig Angle transmission -4Chain Sharpening Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceSpecifications Declaration of conformity

TPS-250PN, TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN, TPS-2510, TPS-2510, TPS-250PF/PN, TPS-270PF/PN, TPS-2501 specifications

The Tanaka TPS series represents a line of advanced technological tools designed for efficient and precision-driven operations across various industrial applications. Among the notable models are the TPS-250PN, TPS-2501, TPS-2510, TPS-250PF/PN, and TPS-270PF/PN. Each model embodies unique features tailored to enhance productivity and user experience.

The TPS-250PN stands out for its robust construction and reliability, making it suitable for heavy-duty tasks. It is equipped with a powerful motor that ensures consistent performance even under demanding conditions. The lightweight design facilitates maneuverability, allowing operators to work with ease over prolonged periods.

The TPS-2501 emphasizes versatility, combining various functionalities into a single unit. It incorporates advanced control technologies, enabling precise adjustments suited for different materials and applications. The intuitive interface enhances user engagement and adaptability, making it an ideal choice for both professionals and novices in various sectors.

Meanwhile, the TPS-2510 showcases an advanced safety mechanism, minimizing risks during operation. Its ergonomic design reduces strain on the user's body, contributing to a safer working environment. Enhanced energy efficiency is another hallmark of the TPS-2510, allowing for extended working hours without excessive energy consumption.

The TPS-250PF/PN model integrates innovative feedback systems that monitor performance in real time. Such technology not only optimizes productivity but also provides valuable data for future operational improvements. This predictive capability helps in reducing downtime and maintenance costs, further enhancing overall efficiency.

On the other hand, the TPS-270PF/PN excels in specialized applications, providing high precision and effectiveness in operations that require meticulous attention to detail. This model is particularly valued in sectors like manufacturing and construction, where exact measurements are crucial.

Overall, the Tanaka TPS series, with its varied models including TPS-250PN, TPS-2501, TPS-2510, TPS-250PF/PN, and TPS-270PF/PN, offers state-of-the-art solutions marked by cutting-edge technologies, user-friendly designs, and enhanced safety features. Whether for heavy-duty tasks or precision operations, these tools are engineered to meet the diverse needs of modern-day industries, reinforcing Tanaka's commitment to quality and innovation.
Top Page Image Contents