Motorola CPCI-6020 manual Equipment Required, Environmental and Power Requirements, Task

Equipment RequiredHardware Preparation and Installation

Table 2-1 Startup Overview (continued)

Task	Page
Initialize the system clock.	Chapter 5, Firmware
Examine and/or change environmental	Chapter 8, CNFG and ENV Commands
parameters.
Program the board as needed for your	CPCI-6020 CompactPCI Single Board Computer
applications.	Programmer’s Reference Guide
	Harrier Application Specific Integrated Circuit (ASIC)
	Programmer’s Reference Guide

2.4Equipment Required

The following equipment is recommended to complete an CPCI-6020 system:

zCompactPCI system enclosure (in compliance with CompactPCI Specification, PICMG 2.0, Rev. 2.1)

zSystem console terminal

zOperating system (and/or application software)

zDisk drives (and/or other I/O) and controllers

zTransition module (CPCI-6020-MCPTM-01) and connecting cables

CPCI-6020 modules are designed with front and rear panel I/O. Front panel I/O includes two USB ports, one Ethernet port (unless run to rear), a UART Port 0 and a PMC I/O port (if a PMC is installed). The rear panel I/O is provided via a CPCI-6020-MCPTM-01 Transition Module and includes two Ethernet ports (only port 2 is connected in standard product configuration. Contact custom solution center for connecting port 1 through custom build options), two USB ports, two UART ports (one may be run to front), and two synchronous COM ports.

2.5Environmental and Power Requirements

You must make sure that the blade, when operated in your particular system configuration, meets the environmental requirements specified in the next section.

2.5.1Environmental Requirements

The following table lists the currently available specifications for the environmental characteristics of the CPCI-6020. A complete functional description of the CPCI-6020 baseboard appears in Chapter 4, Functional Description .

CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) 37