Connector Pin Assignments

Transition Module Preparation and Installation

 

 

7.9Connector Pin Assignments

The following tables summarize the pin assignments of RTM connectors that are specific to the CPCI-6020 modules configured for use with the CPCI-6020-MCPTM-01 transition module.

7.9.1CompactPCI Connectors

Connector J3 is a 95-pin AMP Z-pack 2 mm hard metric type B connector. The pinouts for this connector are identical to those on the corresponding J3 connector on the CPCI-6020, and are described in Chapter 3, Controls, LEDs, and Connectors.

Connector J4 is a 110-pin 2 mm hard metric type A connector. This connector is placed on the board for alignment only. The keying tabs on the type A connector assist with alignment of pins in the backplane connector during insertion of the boards. No signals are connected to J4 except the row F ground pins.

Connector J5 is a 110-pin AMP Z-pack 2 mm hard metric type B connector. This connector routes the I/O signals for the two COM ports, the EIDE secondary port, the keyboard, the mouse, the two USB ports (not implemented on the CPCI-6020-MCPTM-01, but related signals are routed to the host I/O connector of the PMC I/O interface) and the two Ethernet ports. The pinouts for this connector are identical to those on the corresponding J5 connector on the CPCI- 6020, and are described in Chapter 3, Controls, LEDs, and Connectors.

7.9.2PMC I/O Module Connector

There is one pair of 64-pin SMT connectors on the CPCI-6020-MCPTM-01 transition module that provide an interface for one optional add-on PMC I/O module (PIM). On the host I/O connectors, a PMC I/O module would only use power, ground, and the OUT-going serial port pins. A host I/O module could potentially use all pins except the OUT-going serial port.

The pin assignments are as follows:

Table 7-4 PMC I/O Module - Host I/O Connector Pin Assignments

 

Pin

Signal

Signal

Pin

 

 

 

 

 

 

 

 

1

IN1_DCD

+12 V

2

 

 

 

 

 

 

 

 

3

IN1_RXD

IN1_TXD

4

 

 

 

 

 

 

 

 

5

+5 V

IN1_DTR

6

 

 

 

 

 

 

 

 

7

IN1_DSR

IN1_RTS

8

 

 

 

 

 

 

 

 

9

IN1_CTS

+3.3 V

10

 

 

 

 

 

 

 

 

11

IN1_RI

IN2_DCD

12

 

 

 

 

 

 

 

 

13

GND

IN2_RXD

14

 

 

 

 

 

 

 

 

15

IN2_TXD

IN2_DTR

16

 

 

 

 

 

 

 

 

17

IN2_DSR

GND

18

 

 

 

 

 

 

 

 

19

IN2_RTS

IN2_CTS

20

 

 

 

 

 

 

 

 

 

 

 

 

 

CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)

143

Page 143
Image 143
Motorola CPCI-6020 CompactPCI Connectors, PMC I/O Module Connector, PMC I/O Module Host I/O Connector Pin Assignments