Motorola CPCI-6020 manual Watchdog shutdown at board reset Y/N = N?

Configuring the PPCBug Parameters CNFG and ENV Commands

The address where the network interface configuration parameters are to be saved/retained in NVRAM; these parameters are the necessary parameters to perform an unattended network boot. A typical offset might be $1000, but this value is application-specific. (Default = $00001000)

Data Loss

If you use the NIOT debugger command, these parameters need to be saved somewhere in the offset range $00001000 through $000016F7. The NIOT parameters do not exceed 128 bytes in size. The setting of this ENV pointer determines their location. If you have used the same space for your own program information or commands, they will be overwritten and lost.

You can relocate the network interface configuration parameters in this space by using the ENV command to change the Network Auto Boot Configuration Parameters Offset from its default of $00001000 to the value you need to be clear of your data within NVRAM.

Watchdog prior status ignored at Autoboot [Y/N] = Y?

Y	Autoboot normally, regardless of prior Watchdog expiration.
N	Abort Autoboot if Watchdog has previously expired

Watchdog reset at board reset [Y/N] = N?

Y	Level 2	Watchdog timer turned off during startup.
N	Level 2	Watchdog timer status (running or reset) unchanged by startup

Watchdog shutdown at board reset [Y/N] = N?

Y	Disable RTC Watchdog during startup.
N	Do not disable RTC Watchdog during startup

Reset Ethernet chip after file transfer [Y/N] = N?

Y	Reset Ethernet chip after transfer.
N	Do not reset Ethernet chip after transfer.

CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) 157