Motorola CPCI-6020 Rear Transition Module Cables, PLD Jtag, Part Number Description, MCPTM-01

Transition Module Preparation and InstallationConnectors and Cables

Table 7-2 Rear Transition Module Connectors/Headers (continued)

Type	Number	Description
Serial Port 4	J17	3-pin header for selection of DTE or DCE interface
Floppy Power	J18	Stand-alone 4-pin power header for floppy
PLD JTAG	J19	8-pin programming header
COM1 Port	J20	3-pin header sets serial port 1 from PIM or CPCI-6020
Speaker Header	J21	For onboard speaker access.

Table 7-3 Rear Transition Module Cables

Part Number	Description
User-supplied	EIA-232-D DTE or DCE cable
User-supplied	20-conductor cable; usually supplied with the modem
User-supplied	6-conductor cable; usually supplied with the modem
Supplied with CPCI-6020-	Keyboard/mouse Y-adapter cable (Motorola Part Number 30-
MCPTM-01	W2309E01A)
User-supplied	40-line flat ribbon cable with 40-pin header connectors for EIDE drives
User-supplied	34-line flat ribbon cable with 34-pin header connectors for floppy drive
CA-8205E	Y-adapter cable, HD-50 male connector to two HD-26 female
	connectors.
User-supplied	2-line cable with 2-pin header connector for speaker
CA27	Straight-through adapter cable to attach a DB-25 male connector to an
(requires: CA-8205E)	HD-26 female connector, 15 feet long. May be used for EIA-232-D
	applications
XR346HD26DB25-K	Straight-through adapter cable to attach a DB-25 female connector to
	an HD-26 male connector, 12 feet long

142 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)