Motorola CPCI-6020 manual 10 J4 Local PCI Expansion Connector Pinout

Controls, LEDs, and Connectors CompactPCI User I/O Connector

3.4.3CompactPCI User I/O Connector

Connector J4 is a 110 pin AMP Z-pack 2 mm hard metric type B connector. This connector routes the PCI bus of Harrier A to hot swap controller bridge board. The pin assignments for J4 on the processor board are shown in Table 3-10(outer row F is assigned and used as ground pins but is not shown in the table).

Table 3-10 J4 Local PCI Expansion Connector Pinout

Pin	Row A	Row B	Row C	Row D	Row E	Pin
25	AD36	AD35	AD34	AD33	AD32	25
24	AD40	AD39	AD38	GND	AD37	24
23	AD45	AD44	AD43	AD42	AD41	23
22	AD49	+3.3 V	AD48	AD47	AD46	22
21	AD53	AD52	AD51	GND	AD50	21
20	AD57	+3.3 V	AD56	AD55	AD54	20
19	AD61	AD60	AD59	GND	AD58	19
18	CBE4#	+3.3 V	PAR64	AD63	AD62	18
17	REQ64#	CBE7#	CBE6#	GND	CBE5#	17
16	AD2	+3.3 V	AD1	AD0	ACK64#	16
15	AD6	AD5	AD4	GND	AD3	15
11	AD9	AD8	CBE0#	GND	AD7	11
10	AD13	+5.0V	AD12	AD11	AD10	10
9	PAR	CBE1#	AD15	GND	AD14	9
8	STOP#	+5.0V	LOCK#	PERR#	SERR#	8
7	FRAME#	IRDY#	TRDY#	GND	DEVSEL#	7
6	AD18	+5.0V	AD17	AD16	CBE2#	6
5	AD21	CLK	AD20	GND	AD19	5
4	CBE3#	+5.0V	RESERVED	AD23	AD22	4
3	AD28	AD27	AD26	AD25	AD24	3
2	GNT#	REQ#	AD31	AD30	AD29	2
1	INTA#	INTB#	INTC#	INTD#	RST#	1

64 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)