Motorola CPCI-6020 manual Board Standard Compliances, IntroductionStandard Compliances

IntroductionStandard Compliances

Table 1-1 Features (continued)

Feature	Description
RTC/NVRAM	32 KB NVRAM/RTC/WDT provided by M48T37V
	Connected to Harrier A Xport 2 configured as 8-bit port
Watchdog Timers	Two independent programmable timers in each Harrier
	One programmable timer in M48T37V
Peripheral Support	USB host/hub interface
	10BaseT/100BaseTX Ethernet interface
	IDE Interface for IDE flash and external IDE drive support
	Two 16550-compatible async serial ports (Harrier UART0/UART1)
	Two sync/async serial ports
	CPCI-6020 (5E Only)
	One PS/2 Keyboard and one PS/2 Mouse
	Floppy disk controller
PMC Slot	One 32/64-bit PMC slot with front-panel I/O plus rear I/O, 33/66 MHz capable
Local PCI Bus	Local 64-bit PCI bus routed to J4 to support additional PCI-to-PCI bridge and
Expansion	CompactPCI bus on companion card
Front Panel	Asynchronous COM port via RJ-45
	10/100 MB Ethernet via RJ-45
	Two USB ports
	Recessed RESET and ABORT switches
	CPU Activity and Board Fail LEDs
	Switch in handle to support hot swap
Debug Support	16550-compatible async serial port (in Harrier) with RS-232 interface
	Processor JTAG Interface
	RESET and ABORT signals
	Access to processor bus via Mictor connector

1.2Standard Compliances

The CPCI-6020 is designed to be CE compliant and to meet the following standard requirements.

Table 1-2 Board Standard Compliances

Standard	Description
UL 60950-1	Safety Requirements (legal)
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1

32 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)