Motorola manual CPCI-6020 Baseboard Preparation

Hardware Preparation and Installation CPCI-6020 Baseboard Preparation

The CPCI-6020 also provides configuration modification via software control by setting bits in control registers after installing the module in a system. The CPCI-6020 control registers are described in the CPCI-6020 CompactPCI Single Board Computer Programmer’s Reference Guide, and the Harrier Application Specific Integrated Circuit (ASIC) Programmer’s Reference Guide.

2.7CPCI-6020 Baseboard Preparation

Prior to installing any memory, flash, or PMC modules on the CPCI-6020 baseboard, ensure that all jumpers that are user configurable are set properly. To do this, refer to Figure 2-1or the board itself for the location of specific jumpers. Set the jumpers according to the following descriptions. Manually configured items on the baseboard include:

zFlash bank selection (J24)

zHarrier Power up configuration header (J22)

zPMC 66 MHz optional setting (J21)

zEnable/disable +12 V and -12 V use on the CPCI-6020 (J18)

zEnable/disable lockdown of one or more flash blocks of Bank A (J17)

zEnable/disable write-protect for all of flash Bank A (J20)

40 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)