Motorola CPCI-6020 manual Mictor Debug Connector, 25 J28 Debug Connector

Mictor Debug ConnectorControls, LEDs, and Connectors

Table 3-24 J25 RISCWatch Header Pin Assignments (continued)

Pin	Signal	Signal	Pin
9	CPUTMS	No Connect	10
11	SRESET_L	No Connect	12
13	CPURST_L	VOID	14
15	CKSTPO_L	GND	16

3.4.14Mictor Debug Connector

A 190-pin Mictor connector provides access to the processor bus (MPU Bus) and some bridge/memory controller signals. It can be used for debugging purposes. The pin assignments are listed in the following table.

Table 3-25 J28 Debug Connector

Pin	Signal		Signal	Pin
1	PA0		PA1	2
3	PA2		PA3	4
5	PA4		PA5	6
7	PA6		PA7	8
9	PA8		PA9	10
11	PA10		PA11	12
		GND
13	PA12		PA13	14
15	PA14		PA15	16
17	PA16		PA17	18
19	PA18		PA19	20
21	PA20		PA21	22
23	PA22		PA23	24
25	PA24		PA25	26
27	PA26		PA27	28
29	PA28		PA29	30
31	PA30		PA31	32
33	PAPAR0		PAPAR1	34
35	PAPAR2		PAPAR3	36
37	APE_L		RSRV_L	38

CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) 75