
Chapter 5: Advanced Serverboard Setup
UIO Power Connector
A Universal I/O power connector
Universal I/O Power Connector
Pin Definitions
(UIOP) is located next to the UID button. This is a required connection for the riser cards installed on the serverboard. Connect the UIOP con- nector to the power supply to provide adequate power to the installed add- on cards installed for them to function properly. See the table on the right for pin definitions.
10Gb TLAN Ports and SFP+ Devices (X8DTU-6TF+)
Two 10Gb Ethernet ports (TLAN1/2) with Small_Form Factor Pluggable Device support are located at on the I/O backplane on the
SAS BBU Connector
A SAS Battery Backup Unit (BBU) connector is located near the SAS ports. In the event of a power out- age, the BBU unit will provide backup power for SAS connection use.
(Part#:
Pin# Definition
B1 P5V
B2 P5V
B3 P5V
B4 P5V
B5 P5V
B6 P5V
B7 P5V
B8 P5V
B9 P5V
B10 P5V
B11 N12V
B12 P3V3
STBY
B13 P3V3
STBY
B14 Ground
B15 Ground
B16 Ground
B17 Ground
B18 Ground
Pin # Definition
A1 P3V3
A2 P3V3
A3 P3V3
A4 P3V3
A5 P3V3
A6 P3V3
A7 P3V3
A8 P3V3
A9 P3V3
A10 P3V3
A11 P3V3
A12 P3V3
A13 P12V
A14 P12V
A15 P12V
A16 P12V
A17 P12V
A18 Ground