SUPER MICRO Computer 1.0a user manual NMI Button, Power LED, HDD LED/UID Switch

SUPERSERVER 6016T-6RFT+/6016T-6RF+ User's Manual

NMI Button

The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin definitions.

Power LED

The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin definitions.

HDD LED/UID Switch

The HDD LED/UID switch connec- tions are located on pins 13/14 of JF1. Attach an LED cable to display HDD activity. This connection can also be used as a front panel UID (Unit Identi- fier) switch. The UID LED on pin 7 of JF1 works in conjunction with this UID switch. When the user presses and releases the UID switch, the UID LED will be turned on or off to indicate the location of the unit.

NIC1 LED

The NIC1 (Network Interface Control- ler) LED connection is located on pins 11 and 12 of JF1. Attach the NIC1 LED cable to display network activity. Refer to the table on the right for pin definitions.

NIC2 LED

The NIC2 (Network Interface Control- ler) LED connection is located on pins 9 and 10 of JF1. Attach the NIC2 LED cable to display network activity. Refer to the table on the right for pin definitions.

NMI Button

Pin Definitions (JF1)

Pin# Definition

19Control

20Ground

Power LED

Pin Definitions (JF1)

Pin# Definition

15Vcc

16Control

HDD/UID Switch

Pin Definitions (JF1)

Pin# Definition

13UID Signal/3.3V SB

14HD Active

NIC1 LED

Pin Definitions (JF1)

Pin# Definition

11Vcc

12Ground

NIC2 LED

Pin Definitions (JF1)

Pin# Definition

9Vcc

10Ground

5-16