Motorola CPCI-6020 manual Safety Notes

Safety Notes

Before touching the module or electronic components, make sure that you are working in an ESD-safe environment.

Damage of Module and Additional Devices

Incorrect installation of additional devices or modules may damage the product or the additional devices or modules.

Before installing or removing an additional device or module, read the respective documentation.

Board Damage

Inserting or removing modules that are not HA capable with power applied may result in damage to module components.

Verify that your board is HA capable.

Product Damage

Prevent possible damage to module components by verifying the proper slot usage for your configuration.

Check the icons and colored card rails for slot purpose prior to installing a module.

Damage to the Product/Backplane or System Components

Bent pins or loose components can cause damage to the product, the backplane, or other system components.

Therefore, carefully inspect the product and the backplane for both pin and component integrity before installation.

Embedded Communications Computing and our suppliers take significant steps to ensure there are no bent pins on the backplane or connector damage to the boards prior to leaving the factory. Bent pins caused by improper installation or by inserting boards with damaged connectors could void the ECC warranty for the backplane or boards.

22 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)