10
11
CQ-VD7005W
English
AV-OUT
PRE-OUT REAR
S.W-OUT
PRE-OUT CENTER
REVERSE
PRE-OUT FRONT
CAMERA-IN
AV1-IN
AV2-IN
REMOTE-IN
Reverse Lead
When connecting the rear view camera, use
the reverse lead. (apage 15)
Note:
Use a Reverse Extension Cord
!5
if needed.
Note:
¡To prevent from damage to the unit, be sure to follow the wiring diagrams below.
¡Be sure to fully plug in the connectors. Secure them with clamps and tapes.
¡All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or
your dealer if other methods are required.
Video Output Terminal (AV-OUT)
Connect the rear monitor. (apage 16)
Radio Antenna Connector (RADIO ANT IN)
RGB Connector
To the Panasonic Car Navigation System (available in future).
System-up Connector
To external devices equipped with system-up connector.
Pre-Out Connector (front)
To an external amplifier.
Pre-Out Connector (center)
To an external amplifier.
Pre-Out Connector (rear)
To an external amplifier.
Pre-Out Subwoofer connector (mono)
To an external amplifier.
Video Input Terminal (AV1-IN/AV2-IN)
Connect a VCR, camcorder, other brand’s car
navigation system, etc. (apage 16)
Note: When an external device is connected
to the system-up connector, the audio termi-
nals, {(R)(Red), (L)(White)}, of AV2-IN are
disabled.
Remote-In Lead
(not used)
Camera Input Terminal (CAMERA-IN)
Connect a rear view camera. (apage 15)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(Yellow)
(R)(Red)
(L)(White)
(Yellow)
(R)(Red)
(L)(White)
(Yellow)
(Yellow)
(Brown/black stripe)
(Violet/white stripe)
(Black)
(Black)
CQ-VD7005W
(Rear)
: This book refers to connections to the Panasonic car navigation system that will come onto the market in the
future. Descriptions regarding the car navigation system are boxed with a dotted line.