Panasonic CQ-VA7005W manual AV Mode Selection, Touch Source Button. d, AV1/AV2 on

English

25

AV1/AV2

Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are connected.

Preparation:

¡Connect an optional external device to the AV1/AV2.

AV Mode Selection

You can view the images and listen to the sounds from the connected external devices in the AV1/AV2 mode respectively.

qTouch “Source Button”. d

w Touch /

(AV1/AV2) on the

Source Selection

Screen.

Source Button

TILT CLOSE

ASPECT					OPEN / CLOSE
ASP		CQ-VD7005W		TILT	O / C
P·MODE					TEXT
		CQ-VD7001U
VOL
	PWR				ENTER
MUTE	SRC	MENU	NAVI

[SRC]	[ENTER]
Press [SRC] to change to the desired
mode.

To switch Operation Screen ON, touch the center of touch panel or press [ENTER].

Note:

¡You can set up the system so that the AV mode is not selected (source skip). (a page 37) (AV set to NAVI INPUT is not skipped even if SOURCE SKIP is set to ON )

¡If no operation is performed for 10 seconds or is touched, the operation buttons disappear.

¡AV terminal is not used for the Panasonic car navigation system (available in the future). Refer to NAVI SETUP for setting. (a System Upgrade

Guidebook)

26

CQ-VD7005W