33
34 CQ-VD7005W
English
Settings (continued)
SP LEVEL (Speaker level)
Adjusting the output balance of each speaker
: down, : up
: down, : up
: down, : up
: down, : up
: down, : up
: down, : up
Setting range: –10 dB to +10 dB (1 dB steps)
default: ±0 dB for all speakers
¡If the speaker setting is or for a speaker, the
test signal is not output and that speaker cannot be
selected.
¡Turn rotary volume controller or press [+] or [–]
(VOL) to adjust the volume of the test signal.
NONONE
[
]
(Subwoofer speaker output
balance)
SUB - W
[
]
(Left surround speaker output
balance)
L¡SUR
[
]
(Right surround speaker out-
put balance)
R¡SUR
[
]
(Right front speaker output
balance)
FRONT R
[
]
(Center speaker output bal-
ance)
CENTER
[
]
(Left front speaker output bal-
ance)
FRONT L
SP SETUP (Speaker set up)
Setting the absence/presence and size of each speaker
: for small speakers, or when bass playback
is not possible
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
default:
LARGE
LARGE
SMALL
(Front speaker setting)
FRONT
: subwoofer phase 0 degree
: subwoofer phase 180-degree inverted
Note:
¡This setting is feasible only when is set to
.
default:
0°
YES
SUB-W
180°
0°
(Phase setting)
PHASE
: when using a subwoofer
: when not using a subwoofer
default:
* A subwoofer (option, CJ-SW3003 recommended) is
required. A power amplifier (option) is also required for
connecting a subwoofer.
NO
NO
YES
(Subwoofer speaker setting)
SUB - W
: when not using a center speaker
: for small speakers, or when bass playback
is not possible
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
default:
* A center speaker (option, EAB-CF2 recommended) is
required.
NONE
LARGE
SMALL
NONE
(Center speaker setting)
CENTER
: when not using a surround speaker
: for small speakers, or when bass playback
is not possible
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
default:
LARGE
LARGE
SMALL
NONE
(Surround speaker setting)
SUR
(AUDIO continued)
Note:
¡While the private mode is active, only can be
adjusted.
FRONT