English
Troubleshooting (continued)
■Display Settings
43
The brightness of the screen is not stable.
The picture is dark. The
picture is whitish. Something
is wrong with the picture. The picture is light in color.
The display does not go
back into the unit.
AUTO dimmer is selected.
aSelect one of the dimmer levels from among 1 to 4 to make the dimmer adjustment become free from light intensity.
The screen is not adjusted properly.
aMake every adjustment of the screen.
The monitor stops on the way to the home position.
aPress [OPEN] (CLOSE).
■Remote Control Unit
No response to pressing
buttons
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
The aiming direction of the remote control unit is wrong.
aAim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be operable when the sensor is exposed to direct sunlight. In such a case, the sys- tem is not faulty.)
aBlock off sunlight to the sensor.
REAR is selected for the remote control setting. aSelect FRONT for the remote control setting.
Unable to turn on the power of the main unit through the remote control
OFF is selected for the ACC selection.
aSelect ON for the ACC selection.
aPress [SRC] (PWR) of the main unit to turn on the power.
44
