Chapter 4 Basic and Additional SIP Services
Additional SIP Services
•LoginID0, page
•LoginID1, page
•PWD0, page
•PWD1, page
Setting the Codec
The LBRCodec
Configuring Refresh Interval
When the value specified in the CfgInterval parameter is reached, the Cisco ATA attempts to refresh its configuration file from the TFTP server. By opening a web page for the Cisco ATA, you can perform a refresh before the scheduled refresh. Set the CfgInterval parameter to an interval value (in seconds) for refreshing the Cisco ATA configuration file. Cisco recommends that the interval be
When the Cisco ATA contacts the TFTP server, it also checks to see if an upgrade signaling image has been placed on the TFTP server. If such an image exists, the Cisco ATA will download this image.
Additional SIP Services
This section describes additional SIP services and, where applicable, provides configuration information and cross references to the parameters for configuring these services. These services are listed alphabetically.
•Advanced Audio Configuration, page
•Billable Features, page
•Comfort Noise During Silence Period When Using G.711, page
•Configurable Hook Flash Timing, page
•Configurable Mixing of Call Waiting Tone and Audio, page
•Configurable
•Debugging Diagnostics, page
•Dial Plan, page
•Disabling Access To The Web Interface, page
•Distinctive Ringing, page
•DNS SRV Support, page
•Hardware Information Display, page
•NAT Gateway, page
•NAT/PAT Translation, page
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
|
| ||
|
|
