Cisco Systems 188, 186 manual FeatureTimer, 0x00019e60, 316

Chapter 5 Parameters and Defaults

Operating Parameters

Default

0x00019e60

Voice Configuration Menu Access Code

316

FeatureTimer

Description

This parameter provides configurable timing values for various features, as shown below.

•Bits 0-3—Maximum time to spend redialing if line is busy

–Range: 0 - 15

–Factor: five-minute increments

–Values: 0 - 75 minutes

–Default: 0 (= 30 minutes)

•Bits 4-7—Retry interval if line is busy

–Range: 0 - 15

–Factor: 15-second increments

–Values: 0 - 225 seconds

–Default: 0 (= 15 seconds)

•Bits 8-12—On-hook delay before a call is disconnected. This feature works only when the

Cisco ATA is the terminating endpoint of the call. The user can hang up the phone in one room and pick up the phone in another room without disconnecting the line.

–Range: 0 - 31

–Factor: five-second increments

–Values: 0 - 155 seconds

–Default: 0 (no delay)

•Bits 13-15—Amount of time the Cisco ATA waits for a "486 Busy Here" response from a PSTN gateway after receiving a "183 Session Progress" response.

–Range: 0 - 7

–Factor: one-second increments

–Values: 0 to 7 seconds

–Default: 0 (no waiting)

•Bits 16-31—Reserved.

Value Type

Bitmap

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

5-26 OL-3410-01