Tanaka TPE-2510, TPE-25OPF Spark plug Fig, Muffler -3B, Cylinder Engine cooling -3C, Blade 1 Fig

Page 10
Spark plug (Fig. 3-3)

TPE-2501,TPE-2510,TPE-270PF/PN,TPE-250PF Owner’s Manual

Spark plug (Fig. 3-3)

The spark plug condition is influenced by:

•An incorrect carburetor setting.

•Wrong fuel mixture (too much oil in the gasoline)

•A dirty air filter.

•Hard running conditions (such as cold weather).

These factors cause deposits on the spark plug electrodes, which may result in malfunction and starting difficulties. If the engine is low on power, difficult to start or runs poorly at idling speed, always check the spark plug first. If the spark plug is dirty, clean it and check the electrode gap. Readjust if necessary. The correct gap is 0.6 mm. The spark plug should be replaced after about 100 operation hours or earlier if the electrodes are badly eroded.

NOTE!

In some areas, local law requires using a resistor spark plug to suppress ignition signals. If this machine was originally equipped with resistor spark plug, use same type of spark plug for replacement.

Muffler (Fig. 3-3B)

Remove the muffler and clean out any excess carbon from the exhaust port or muffler inlet every 100 hours of operation.

Cylinder (Engine cooling) (Fig. 3-3C)

The engine is air cooled, and air must circulate freely around engine and over cooling fins on cylinder head to prevent overheating.

Every 100 Operating hours, or once a year (more often if conditions require), clean fins and external surfaces of engine of dust, dirt and oil deposits which can contribute to improper cooling.

NOTE!

Do not operate engine with engine shroud or muffler guard removed as this will cause overheating and engine damage.

Blade (1) (Fig. 3-4)

Muffler (Fig. 3-3B) WARNING!

•Wear protective gloves when handling or performing maintenance on the blade.

•When replacing blade, purchase one recommended by TANAKA, with a 25.4mm (one inch) fitting hole.

•Use correct blade for the type of work.

•When replacing blade, use appropriate tools.

•Discard blades that are bent, warped, cracked, broken or damaged in any way.

Angle transmission (Fig. 3-5)

Check angle transmission or angle gear for grease level about every 50 hours of operation by removing the grease filler plug on the side of angle transmission.

If no grease can be seen on the flanks of the gears, fill the transmission with a quality lithium based multipurpose grease up to 3/4.

Do not completely fill the transmission.

Spark Arrestor

If your unit comes with spark arrestor screen and yet your local regulation requires use of spark arrestor for prevention against a possible fire, please attach it to the muffler by removing muffler protector and other related parts. (The spark arrestor meets the regulation of SAE J335-SEP90 and CSA CAN3-Z62.1-M77.)

www.tanaka-usa.com

9

custsvc@tanaka-ism.com

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Owner’s Manual POLE EDGERSSupplier To The Outdoor Power Equipment Industry TPE-2501,TPE-2510Before using this unit 1. What is What? Tool safety 2. Warnings and safety instructionsOperator safety Fuel safety3. Assembly procedures Throttle wire/stop cordInstallation of wheel Fig. 1-7C Installation of blade guard Fig.Installation of blade Fig. Fuel 4. Operating proceduresFueling Cutting Fig. 2-4,2-4B Starting FigStopping Fig Idle speed adjustment T 5. MaintenanceCarburetor adjustment Fig Cleaning the air filterCylinder Engine cooling Fig. 3-3C Spark plug FigMuffler Fig. 3-3B Blade 1 FigWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceAccessories 6. SpecificationsDry Weight kg Model
Related manuals
Manual 17 pages 7.48 Kb Manual 17 pages 22.74 Kb

TPE-2501, TPE-2510, TPE-25OPF, TPE-270PF/PN specifications

The Tanaka TPE-2510 is a highly regarded technology and engineering tool designed for various applications across different industries. One of its notable features is its user-friendly interface that simplifies operations, making it accessible to professionals and beginners alike. This ease of use not only enhances productivity but also allows users to focus on the task at hand without being bogged down by complex settings.

At the core of the TPE-2510 is its advanced processing technology. This machine is equipped with a powerful motor that ensures efficient performance, enabling it to handle a significant workload with precision. The TPE-2510 also boasts superior build quality, which translates to durability and longevity, making it a sound investment for any workshop or industrial setting.

One of the standout characteristics of the Tanaka TPE-2510 is its versatility. It is suitable for a wide range of applications, from manufacturing to research and development. Users can adapt the machine to meet specific needs, thanks to its flexible configuration options. This adaptability makes it an invaluable asset in dynamic environments where requirements may frequently change.

The TPE-2510 also incorporates cutting-edge technology in its design. Features such as real-time monitoring and advanced data analytics allow users to optimize their operations and improve efficiency. The integration of these technologies not only enhances performance but also contributes to energy savings and reduced operational costs.

Moreover, the TPE-2510 is designed with safety in mind. It includes multiple safety features that protect both the operator and the machine. This focus on safety ensures that users can operate with confidence, knowing that every precaution has been taken to minimize risks.

In conclusion, the Tanaka TPE-2510 is a formidable tool that combines ease of use, advanced technology, and robust features. Its versatility makes it suitable for a diverse array of applications, while its emphasis on safety and efficiency underscores Tanaka's commitment to quality engineering. Whether in a manufacturing environment or a research laboratory, the TPE-2510 stands out as a reliable solution for modern technological challenges, ensuring that users can achieve their objectives with precision and efficiency.
Top Page Image Contents