Tanaka TPE-270PF/PN, TPE-2510 Starting Fig, Cutting -4,2-4B, Stopping Fig, custsvc@tanaka-ism.com

Page 8
Starting (Fig. 2-2)

TPE-2501,TPE-2510,TPE-270PF/PN,TPE-250PF Owner’s Manual

Starting (Fig. 2-2)

CAUTION!

Before starting, make sure the cutting attachment does not touch anything.

1. Set ignition switch (1) to ON position.

*Push priming bulb (4) several times so that fuel flows through bulb into carburetor. (if so equipped)(Fig. 2-2B,3)

2.With the safety lever (2) pressed (if so equipped), pull throttle trigger and push lock button (3), then slowly release the throttle trigger first, then the safety lever. This will lock the throttle in starting position.

3.Set choke lever to CLOSED position (5). (Fig. 2-2B,3)

4.Pull recoil starter briskly, taking care to keep the handle in your grasp and not allowing it to snap back.

5.When you hear the engine want to start, return choke lever to RUN position (open). Then pull recoil starter briskly again.

NOTE!

If engine does not start, repeat procedures from 2 to 5.

6. After starting engine, pull throttle lever to release lock button.

Cutting (Fig. 2-4,2-4B)

Use edger properly. Use only for edging the type of grass and other growth for which the machine is designed. Do not abuse engine.

1)Adjust cutting depth by loosening knob nut (1) and moving location of wheel up or down. To increase cutting depth, move the wheel location upwards and to decrease, move it lower. After the location is decided, tighten knob nut (1) securely.

NOTE!

The adjustment should be made after engine stopped completely and stop switch is in stop position.

2)Always hold unit firmly with both hands and keep your body well balanced. 3) Always operate the power edger positioned at the right-side of the operator. (Fig. 2-4C)

Cutting (Fig. 2-4,2-4B)WARNING!

Operate the unit from position where guards block the line of sight to the cutting blade.

Stopping (Fig. 2-5)WARNING!

If cutter should strike against stones or other debris, stop the engine and make sure that the cutter and related parts are undamaged. When grass or vines wrap around cutler, stop engine and blade and remove it.

Stopping (Fig. 2-5)

Decrease engine speed and run at an idle for a few minutes, then turn off ignition switch.

Manual background WARNING!

A blade can injure while it continues to spin after the engine is stopped or power control is released. When the unit is turned off, make sure the cutting attachment has stopped before the unit is set down.

www.tanaka-usa.com

7

custsvc@tanaka-ism.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents POLE EDGERS Supplier To The Outdoor Power Equipment IndustryOwner’s Manual TPE-2501,TPE-2510Before using this unit 1. What is What? 2. Warnings and safety instructions Operator safetyTool safety Fuel safety3. Assembly procedures Throttle wire/stop cordInstallation of blade Fig. Installation of blade guard Fig.Installation of wheel Fig. 1-7C Fueling 4. Operating proceduresFuel Stopping Fig Starting FigCutting Fig. 2-4,2-4B 5. Maintenance Carburetor adjustment FigIdle speed adjustment T Cleaning the air filterSpark plug Fig Muffler Fig. 3-3BCylinder Engine cooling Fig. 3-3C Blade 1 FigMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenance6. Specifications Dry Weight kgAccessories Model
Related manuals
Manual 17 pages 7.48 Kb Manual 17 pages 22.74 Kb

TPE-2501, TPE-2510, TPE-25OPF, TPE-270PF/PN specifications

The Tanaka TPE-2510 is a highly regarded technology and engineering tool designed for various applications across different industries. One of its notable features is its user-friendly interface that simplifies operations, making it accessible to professionals and beginners alike. This ease of use not only enhances productivity but also allows users to focus on the task at hand without being bogged down by complex settings.

At the core of the TPE-2510 is its advanced processing technology. This machine is equipped with a powerful motor that ensures efficient performance, enabling it to handle a significant workload with precision. The TPE-2510 also boasts superior build quality, which translates to durability and longevity, making it a sound investment for any workshop or industrial setting.

One of the standout characteristics of the Tanaka TPE-2510 is its versatility. It is suitable for a wide range of applications, from manufacturing to research and development. Users can adapt the machine to meet specific needs, thanks to its flexible configuration options. This adaptability makes it an invaluable asset in dynamic environments where requirements may frequently change.

The TPE-2510 also incorporates cutting-edge technology in its design. Features such as real-time monitoring and advanced data analytics allow users to optimize their operations and improve efficiency. The integration of these technologies not only enhances performance but also contributes to energy savings and reduced operational costs.

Moreover, the TPE-2510 is designed with safety in mind. It includes multiple safety features that protect both the operator and the machine. This focus on safety ensures that users can operate with confidence, knowing that every precaution has been taken to minimize risks.

In conclusion, the Tanaka TPE-2510 is a formidable tool that combines ease of use, advanced technology, and robust features. Its versatility makes it suitable for a diverse array of applications, while its emphasis on safety and efficiency underscores Tanaka's commitment to quality engineering. Whether in a manufacturing environment or a research laboratory, the TPE-2510 stands out as a reliable solution for modern technological challenges, ensuring that users can achieve their objectives with precision and efficiency.
Top Page Image Contents