Installation of blade guard Fig | Tanaka TPE-2510, TPE-270PF/PN

TPE-2501,TPE-2510,TPE-270PF/PN,TPE-250PF Owner’s Manual

Installation of blade guard (Fig. 1-7)

1)Install blade guard (1) on gear case (4) temporarily by clamping with guard brackets (2) and screws (3). Then tighten as needed.

2)Line up the slot of guard bracket (2) with the same of gear case (4), then tighten screws

(3) securely. (Fig. 1-7B)

Installation of wheel (Fig. 1-7C)

1)Installation the wheel as the illustration.

2)After installation, check if the wheel turns smoothly.

Installation of blade (Fig. 1-8)

1)Before installation of blade, take off left hand threaded fixing nut (1), cutter holder cap (2) from the blade shaft.

2)Install blade (3) on the shaft and then replace the cutter holder cap and fixing nut in order.

NOTE!

When installing cutter holder cap (2), be sure to set concave side facing blade.

3)Insert the locking bar (4) into the hole of the cutter holder (5) and gear case by lining up each hole.

4)Tighten the fixing nut securely (clockwise to loosen/counter-clockwise to tighten).

www.tanaka-usa.com

custsvc@tanaka-ism.com

TPE-2501, TPE-2510, TPE-25OPF, TPE-270PF/PN specifications

The Tanaka TPE-2510 is a highly regarded technology and engineering tool designed for various applications across different industries. One of its notable features is its user-friendly interface that simplifies operations, making it accessible to professionals and beginners alike. This ease of use not only enhances productivity but also allows users to focus on the task at hand without being bogged down by complex settings.

At the core of the TPE-2510 is its advanced processing technology. This machine is equipped with a powerful motor that ensures efficient performance, enabling it to handle a significant workload with precision. The TPE-2510 also boasts superior build quality, which translates to durability and longevity, making it a sound investment for any workshop or industrial setting.

One of the standout characteristics of the Tanaka TPE-2510 is its versatility. It is suitable for a wide range of applications, from manufacturing to research and development. Users can adapt the machine to meet specific needs, thanks to its flexible configuration options. This adaptability makes it an invaluable asset in dynamic environments where requirements may frequently change.

The TPE-2510 also incorporates cutting-edge technology in its design. Features such as real-time monitoring and advanced data analytics allow users to optimize their operations and improve efficiency. The integration of these technologies not only enhances performance but also contributes to energy savings and reduced operational costs.

Moreover, the TPE-2510 is designed with safety in mind. It includes multiple safety features that protect both the operator and the machine. This focus on safety ensures that users can operate with confidence, knowing that every precaution has been taken to minimize risks.

In conclusion, the Tanaka TPE-2510 is a formidable tool that combines ease of use, advanced technology, and robust features. Its versatility makes it suitable for a diverse array of applications, while its emphasis on safety and efficiency underscores Tanaka's commitment to quality engineering. Whether in a manufacturing environment or a research laboratory, the TPE-2510 stands out as a reliable solution for modern technological challenges, ensuring that users can achieve their objectives with precision and efficiency.