Tanaka TPE-2501, TPE-270PF/PN, TPE-25OPF Operating procedures, Fueling, custsvc@tanaka-ism.com

Page 7
Owner’s Manual

TPE-2501,TPE-2510,TPE-270PF/PN,TPE-250PF

Owner’s Manual

 

4. Operating procedures.

4. Operating procedures. WARNING!

This unit is equipped with a two-stroke engine. Always run the engine on fuel, which is mixed with oil. Provide good ventilation, when fueling or handling fuel.

Fuel

•Always use branded 89 octane unleaded gasoline.

•Use Tanaka two-cycle oil or a quality two-cycle oil at mixing ratio of 25-50:1 (Gasoline (A) : Oil (B)), only for the

state of California at 50: 1.

•Never use multi-grade oil (10 W/30) or waste oil.

•Always mix fuel and oil in a separate clean container.

Always start by filling half the amount of fuel, which is to be used. Then add the whole amount of oil. Mix (shake) the fuel mixture.

Add the remaining amount of fuel.

Mix (shake) the fuel-mix thoroughly before filling the fuel tank.

Fueling

Fuel WARNING!

•Always shut off the engine before refueling.

•Slowly open the fuel tank, when filling up with fuel, so that possible over-pressure disappears.

•Tighten the fuel cap carefully, after fueling.

•Always move the unit at least 3 m (10 ft.) from the fueling area before starting.

Before fueling, clean the tank cap area carefully, to ensure that no dirt falls into the tank.

Make sure that the fuel is well mixed by shaking the container, before fueling.

www.tanaka-usa.com

6

custsvc@tanaka-ism.com

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TPE-2501,TPE-2510 POLE EDGERSSupplier To The Outdoor Power Equipment Industry Owner’s ManualBefore using this unit 1. What is What? Fuel safety 2. Warnings and safety instructionsOperator safety Tool safetyThrottle wire/stop cord 3. Assembly proceduresInstallation of wheel Fig. 1-7C Installation of blade guard Fig.Installation of blade Fig. Fuel 4. Operating proceduresFueling Cutting Fig. 2-4,2-4B Starting FigStopping Fig Cleaning the air filter 5. MaintenanceCarburetor adjustment Fig Idle speed adjustment TBlade 1 Fig Spark plug FigMuffler Fig. 3-3B Cylinder Engine cooling Fig. 3-3CMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceModel 6. SpecificationsDry Weight kg Accessories
Related manuals
Manual 17 pages 7.48 Kb Manual 17 pages 22.74 Kb

TPE-2501, TPE-2510, TPE-25OPF, TPE-270PF/PN specifications

The Tanaka TPE-2510 is a highly regarded technology and engineering tool designed for various applications across different industries. One of its notable features is its user-friendly interface that simplifies operations, making it accessible to professionals and beginners alike. This ease of use not only enhances productivity but also allows users to focus on the task at hand without being bogged down by complex settings.

At the core of the TPE-2510 is its advanced processing technology. This machine is equipped with a powerful motor that ensures efficient performance, enabling it to handle a significant workload with precision. The TPE-2510 also boasts superior build quality, which translates to durability and longevity, making it a sound investment for any workshop or industrial setting.

One of the standout characteristics of the Tanaka TPE-2510 is its versatility. It is suitable for a wide range of applications, from manufacturing to research and development. Users can adapt the machine to meet specific needs, thanks to its flexible configuration options. This adaptability makes it an invaluable asset in dynamic environments where requirements may frequently change.

The TPE-2510 also incorporates cutting-edge technology in its design. Features such as real-time monitoring and advanced data analytics allow users to optimize their operations and improve efficiency. The integration of these technologies not only enhances performance but also contributes to energy savings and reduced operational costs.

Moreover, the TPE-2510 is designed with safety in mind. It includes multiple safety features that protect both the operator and the machine. This focus on safety ensures that users can operate with confidence, knowing that every precaution has been taken to minimize risks.

In conclusion, the Tanaka TPE-2510 is a formidable tool that combines ease of use, advanced technology, and robust features. Its versatility makes it suitable for a diverse array of applications, while its emphasis on safety and efficiency underscores Tanaka's commitment to quality engineering. Whether in a manufacturing environment or a research laboratory, the TPE-2510 stands out as a reliable solution for modern technological challenges, ensuring that users can achieve their objectives with precision and efficiency.
Top Page Image Contents