Tanaka TPE-25OPF, TPE-2510 Maintenance, Establishment Or Individual, Carburetor adjustment Fig

Page 9
5. Maintenance.

TPE-2501,TPE-2510,TPE-270PF/PN,TPE-250PF Owner’s Manual

5. Maintenance.

MAINTENANCE, REPLACEMENT, OR RE PAIR OF THE EMISSION CONTROL DEVICES

AND SYSTEMS MAY BE PERFORMED BY ANY NONROAD ENGINE REPAIR

ESTABLISHMENT OR INDIVIDUAL.

Carburetor adjustment (Fig. 3-1)

ESTABLISHMENT OR INDIVIDUAL. WARNING!

The cutting attachment may be spinning during carburetor adjustments.

Carburetor adjustment (Fig. 3-1) WARNING!

Never start the engine without the complete clutch cover and tube assembled! Otherwise the clutch can come loose and cause personal injuries.

In the carburetor, fuel is mixed with air. When the engine is test run at the factory, the carburetor is basically adjusted. A further adjustment may be required, according to climate and altitude. The carburetor has one adjustment possibility:

T = Idle speed adjustment screw.

Idle speed adjustment (T)

Check that the air filter is clean. When the idle speed is correct, the blade will not rotate. If adjustment is required, close (clockwise) the T-screw, with the engine running, until the blade starts to rotate. Open (counterclockwise) the screw until the blade stops.

You have reached the correct idle speed when the engine runs smoothly in all positions well below the rpm when the blade starts to rotate. If the blade still rotates after idle speed adjustment, contact your service workshop.

NOTE!

Standard Idle rpm is 2500-3000 rpm.

Idle speed adjustment (T) WARNING!

When the engine is idling the blade must under no circumstances rotate.

Air filter (Fig. 3-2)

The air filter must be cleaned from dust and dirt in order to avoid:

•Carburetor malfunctions.

•Starting problems.

•Engine power reduction.

•Unnecessary wear on the engine parts.

•Abnormal fuel consumption.

Clean the air filter daily or more often if working in exceptionally dusty areas.

Cleaning the air filter

Remove the air filter cover and the filter (1).

Rinse it in warm soap suds. Check that the filter is dry before reassembly. An air filter that

has been used for some time cannot be cleaned completely. Therefore, it must regularly be replaced by a new one. A damaged filter must always be replaced.

Fuel filter (Fig. 3-2B)

Drain all fuel from fuel tank and pull fuel filter line from tank. Pull filter element out of holder assembly. Replace filter if it appears to be discolored or hardened from use. The filter has a white, felt-like appearance when new.

www.tanaka-usa.com

8

custsvc@tanaka-ism.com

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Supplier To The Outdoor Power Equipment Industry POLE EDGERSOwner’s Manual TPE-2501,TPE-2510Before using this unit 1. What is What? Operator safety 2. Warnings and safety instructionsTool safety Fuel safetyThrottle wire/stop cord 3. Assembly proceduresInstallation of blade guard Fig. Installation of wheel Fig. 1-7CInstallation of blade Fig. 4. Operating procedures FuelFueling Starting Fig Cutting Fig. 2-4,2-4BStopping Fig Carburetor adjustment Fig 5. MaintenanceIdle speed adjustment T Cleaning the air filterMuffler Fig. 3-3B Spark plug FigCylinder Engine cooling Fig. 3-3C Blade 1 FigDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceDry Weight kg 6. SpecificationsAccessories Model
Related manuals
Manual 17 pages 7.48 Kb Manual 17 pages 22.74 Kb

TPE-2501, TPE-2510, TPE-25OPF, TPE-270PF/PN specifications

The Tanaka TPE-2510 is a highly regarded technology and engineering tool designed for various applications across different industries. One of its notable features is its user-friendly interface that simplifies operations, making it accessible to professionals and beginners alike. This ease of use not only enhances productivity but also allows users to focus on the task at hand without being bogged down by complex settings.

At the core of the TPE-2510 is its advanced processing technology. This machine is equipped with a powerful motor that ensures efficient performance, enabling it to handle a significant workload with precision. The TPE-2510 also boasts superior build quality, which translates to durability and longevity, making it a sound investment for any workshop or industrial setting.

One of the standout characteristics of the Tanaka TPE-2510 is its versatility. It is suitable for a wide range of applications, from manufacturing to research and development. Users can adapt the machine to meet specific needs, thanks to its flexible configuration options. This adaptability makes it an invaluable asset in dynamic environments where requirements may frequently change.

The TPE-2510 also incorporates cutting-edge technology in its design. Features such as real-time monitoring and advanced data analytics allow users to optimize their operations and improve efficiency. The integration of these technologies not only enhances performance but also contributes to energy savings and reduced operational costs.

Moreover, the TPE-2510 is designed with safety in mind. It includes multiple safety features that protect both the operator and the machine. This focus on safety ensures that users can operate with confidence, knowing that every precaution has been taken to minimize risks.

In conclusion, the Tanaka TPE-2510 is a formidable tool that combines ease of use, advanced technology, and robust features. Its versatility makes it suitable for a diverse array of applications, while its emphasis on safety and efficiency underscores Tanaka's commitment to quality engineering. Whether in a manufacturing environment or a research laboratory, the TPE-2510 stands out as a reliable solution for modern technological challenges, ensuring that users can achieve their objectives with precision and efficiency.
Top Page Image Contents