McIntosh C45 owner manual Rear Panel Connections, DVD, CD2, CD

Balanced Main OUTPUTS contain the program signals for all six channels

Unbalanced Main OUTPUTS contain the program signals for all six channels

Rear Panel Connections

Unbalanced 6 CHANNEL INPUT Number 2 for signals coming from a six channel component source

VCR, TAPE, SAT,	Unbalanced 6 CHANNEL
DVD, CD2, CD,	INPUT Number 1 for signals
TUNER unbalanced	coming from a six channel
INPUTS accept high	component source
level program source
signals

Connect the power	IR INPUT for	VCR and TAPE	DATA PORTs send signals	Ground
cord to a live AC	connecting an	Record Outputs	to compatible source compo-	connection
outlet. Refer to in-	IR Receiver	contain the sig-	nents to allow remote con-	for turntables
formation on the		nals for making	trol operation
back panel of the		a recording
C45 to determine
the correct voltage

External KEYPAD or Sensor Jack per- mits the con- nection of a McIn- tosh Keypad or IR Sensor for remote operation

POWER CONTROL and Trigger Outputs send	BALANCED
Turn-On signals to other components connected	INPUTS for a
to the C45. The MAIN Jacks send the signal	two channel
when the C45 is switched On. The ACC POWER	component
CONTROL sends a turn On/Off signal to other	source
components using the Remote Control or
preselected in Setup. The SETUP Feature in the
C45 allows the MAIN(A) and ACC(B) Power
Control Jacks to be re-assigned to Switch On
when the desired Input Source is selected.

PH/AUX accepts high level program source signals or signals from a Moving Magnet Phono Cartridge. The SETUP feature deter- mines whether the Input Jacks are set for AUX or PHONO

8