How to Connect for Data Control and Remote Operation
How to Connect for Data Control and Remote Operation
Data Control Connections facilitate the ability to remotely operate McIntosh Source Components using the supplied C45 Audio Control Center Remote Control. By adding a McIntosh Remote Control Translator/Repeater to the C45, non McIntosh Source Devices such as a Tape Deck can be remotely controlled using a McIntosh Remote Control and Keypad/Sensor.
1.Connect a Control Cable from the C45 DVD DATA PORT Jack to the DATA IN Jack on the McIntosh
2.Connect a Control Cable from the C45 TUNER DATA PORT Jack to the DATA IN Jack on the McIntosh Tuner.
3.Optionally, connect a Control Cable from the C45 TAPE DATA PORT Jack to the Number 1 DATA IN Jack on the McIntosh Remote Control Translator/Re- peater. Connect the Emitter Eye plug end to the McIn- tosh Remote Control Translator/Repeater EMITTER Jack and attach the Emitter Eye over the IR Sensor Window on the Tape Deck.
4.Optionally, connect a cable from the KEYPAD Jack to a Keypad.
Note: A Wall Mounted IR Sensor may also be used in place of the Keypad.
McIntosh
McIntosh Keypad
McIntosh Remote Control Translator/Repeater | IR Sensor | ||
| |||
| Eye | ||
| Tape Deck | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Emitter Eye
10