Setup, con’t
Figure 10
| Figure 11 |
Tuning Method | Description |
TUNE - | Allows for Manual Tuning Up or |
| Down the radio dial. |
PRESETS - | Allows selection of a radio station |
| preset from a previously stored |
| station in memory. |
SEEK - | Automatically scan the dial and |
| will stop on the next available |
| station. |
4. Press the SETUP
Re-Title Inputs
The C45 has nine Audio Inputs, which include the optional TM1 AM/FM Tuner Module. These inputs already have assigned titles that will allow for immediate hookup, opera- tion and enjoyment. In addition, there are two 6 channel in- puts and a balanced input that are assignable as replacement for each one of the inputs.
If these starting assignments do not match up with com- ponents in your system, they may be reassigned from the default settings. The following example will illustrate how to rename the AUX Input to PHONO. When the Input Se- lector is rotated to select what was originally the AUX In- put, PHONO will now appear on the Front Panel Alphanu- meric Display. Refer to figure 3 on page 15.
Notes: 1. Unused Inputs may be switched Off so they will not appear when rotating through the input source choices using the Input Selector and also will not be available when using the Remote Control or Keypad. Refer to figure 12.
2.The New Input Titles that are available for all the Inputs include TAPE 2, LV, TV, and VCR2. The AUX Input (INPUT 1) Titles also includes PHONO.
Figure 12
1.Press the SETUP
2.Press the TONE BYPASS (Menu)
3.Press the TRIM LEVEL UPS or DownT
Note: The “*” before “AUX” indicates the default Title.
Figure 13
4.Rotate the INPUT Control clockwise until the display indicates “INPUT 1 PH”. Refer to figure 14.
Figure 14
5. Press the SETUP
Level Adjustment
Various Source Components can have slightly different vol- ume levels. This could result in the constant need to readjust the C45 Volume Control when switching between different Input Sources. The Level Input Trim Feature on the C45 allows the adjustment of levels for each of the Source In- puts, so that they have the same relative volume. The Tuner and CD Inputs are used in the following example. Refer to figure 3 on page 15.
Notes: The possible range of adjustment in volume level is
±6dB. The Tape/Record Output Levels are unaffected by any changes in the Level Trim Settings. Any LEVEL Trim adjustments made are retained in permanent memory and can be changed only by performing a new Level Trim Procedure. The Tuner Input Volume Level can serve as a reference or choose another Input Source that is frequently listened to as the reference. The reference Input Source should be set to a Level of 00.
1.Rotate the INPUT Control to select the Tuner Input and adjust the VOLUME Control to the desired listening level.
2.Press the SETUP
3.The Front Panel Alphanumeric Display will change and the Red LED above the SETUP
4.Press the TONE BYPASS (Menu)
5.Rotate the INPUT
17