Machine Component Identification - Item #165938N
Reference 9 – Vibration | The engine and generator are mounted on rubber |
Isolation Mounts | cylinders that absorb most of the engine vibration. |
| This feature eliminates the tendency of the machine to |
| “walk” which is common in engine powered equipment. |
Reference 10 – Oil Drain Plug | Refer to your Honda engine manual for oil change |
| recommendations. |
Reference 11 – Super Silent | Noise level is 8 dB less than Honda’s standard muffler. |
Muffler |
|
Reference 12 – Air Cleaner | Refer to your Honda engine manual for air cleaner |
| care. |
Reference 13 – Engine Key | The engine key is located on the engine. Always |
Switch | locate this switch and be familiar with its location |
| before operating the generator. Consult the Honda |
| engine owner’s manual for further instructions. |
Reference 14 – Fuel Valve | The engine has an |
| front of the engine. Always keep this valve closed |
| when the generator is not in use. |
Reference 15 – Choke Lever | Used during cold starts. The choke is only used with |
| gasoline fuel. Refer to Honda engine manual for |
| usage. |
Reference 16 – Recoil | Grasp firmly when starting engine. |
Reference 17 – LPG / NG – ¾” | Before you start engine, smell next to floor for gas, if |
NPT Inlet | you do smell gas: |
| • DO NOT start engine. |
| • DO NOT light a match. |
| • DO NOT flip on an electrical switch. |
| • Exit area immediately and call gas supplier or |
| fire department. |
| Minimum flow range required: NG - 2.0 CFM, |
| LPG - 5.7 lb/hr. |
| Pressure Range: |
| column. NEVER over pressurize. |
Reference 18 – Demand | Supplies the engine LP or NG fuel only if the engine is |
Regulator | running. |
Reference 19 – Generator Head | The electricity producing part of the generator. |
10