North Star MTBSL owner manual Unpacking, Closely inspect all contents in the shipping carton

Page 8

Unpacking

Closely inspect all contents in the shipping carton.

Note that some parts are shipped inside the tank.

•If you have damaged components: Contact the freight company that delivered the unit and file a claim.

•If you have missing components: Contact NorthStar Customer Service at 1-800-270-0810.

Sprayer

Cart Base

Tongue

Axle

Boom Supports

Boom Bracket

Boom Arms

Hitch

186” Gun Hose

24” Hose

14” Hoses

Tires

Spot Spray Gun

Manual Bag

8

Image 8

Contents Mtbsl Hazard Signal Word Definitions Table of Contents Intended Use Spraying PesticidesSummary of Important Safety Information During AssemblyGeneral Chemical Safety Chemical Application SafetyChemical accident procedures Towing SafetyDifferently with filled sprayer attached Closely inspect all contents in the shipping carton UnpackingUnpacking the Manual Bag Following items are found in the manual bagAssembly Step One Attach the tongue to the cart baseStep Two Attach the hitch mount to the tongue Step Three Attach the cart base to the sprayerStep Four Attach wheels to cart base Step Five Attach boom supports and boom bracket to cart baseStep Six Attach boom arms to the boom bracket Step Seven Attach gun hose to spray gun and pump Step Eight Attach hose guide to tankStep Nine Attach gun clips to tank Step Ten Attach drain cap to tankStep Eleven Install boom valve to pump Step Twelve Connect boom valve to boom nozzlesStep Fourteen Connect remote switch to vehicle battery Step Thirteen Attach sprayer to vehicleConnected to the battery Step Fifteen Check and test completed assembly Check and test completed assemblyCheck assembly Working conditionMachine Components Operation Important Safety Information General Chemical SafetyChemical Application Safety Before SprayingDuring Spraying After SprayingTowing Safety Inhalation Inspect Inspect and test the sprayer thoroughly Repair Important safety rulesOperation Preparing the Sprayer for Each Use Spray because the wind is too strong Operation Using the SprayerStep One Assess wind conditions and clear work area Ensure tank is flushed of all chemicals from prior uses Fill the sprayer using the following stepsStep Two Fill the sprayer Check drain Fill tankBegin agitation if Review safetyStep Three Operate the sprayer Unfold one or both boom arms as required Adjust nozzleSqueeze trigger & To spray, squeeze the gun trigger Ensure correct spray pattern Ensure uniform coverageStep Four Clean sprayer and decontaminate after use Drain tankDecontaminate LaunderStorage Preparing for storageRemoving from storage Add antifreezeTroubleshooting Before attempting to service the sprayerSpecifications Any Questions, Comments, Problems or Parts OrdersExploded View 28517/28518 Rev. L Part# Description Model QtyAppendix a Broadcast Spray Calibration Tables Approximate flow from one nozzleSpray Pressure Height