Meridian America 551 manual Examples of configuring the sources, To change a source label

Page 24

Examples of configuring the sources

Customising the integrated amplifier

The following examples illustrate how you can configure the source options to your own requirements.

To change a source label

●Display the source you want to configure, together with its current label, as described in the previous sections.

	For example, to configure the	RDRD
	Radio source label choose:	RDRD
	Radio source label choose:

●Press A or V to step between the alternative labels.

	For example, to use the label FM	RDFM
	for the Radio source set it to:	RDFM
	for the Radio source set it to:

Over 50 alternative labels are provided to allow you to choose the most appropriate ones for your sources. Selecting None turns off the source.

To change the audio input for a source

●Display the source you want to configure, together with the current audio input, as described in the previous sections.

	For example, to configure	CDA2
	the CD audio input choose:	CDA2
	the CD audio input choose:

●Press V or A to choose the audio input.

	For example, if you want to use	CDA3
	input A3 for the CD set it to:	CDA3
	input A3 for the CD set it to:

20

Image 24

Contents Meridian 551 Integrated Amplifier Preface Contents Setting up the integrated Amplifier25 Introduction Professional features Meridian 500 SeriesSeries communications Sample configurations 506 20-Bit CD Player Compact Disc Transport566 20-Bit Digital to Analogue Analogue Controller Converter 562V Multimedia Controller Specification and accessories SpecificationAvailable accessories Introduction Using the integrated amplifier Front panel MuteTo switch on from standby To switch to standbySelecting a source CD65Adjusting the volume MuteOff CD55Changing the display and balance ²O³To change the display To change the balanceRecording a source CSrcCAtt To copy a source to the tape outputCustomising the integrated amplifier Choosing standard settings To select a standard settingType Standard settings VCR2Configuring the sources To configure a sourceConf CD1C To change an optionExamples of configuring the sources To change a source labelTo change the audio input for a source To set up a system with two CD players Programming levels GainTo balance input levels 12dB LP MM LP MCSpecifying information about your system AutoSA=1 PA=1Setting up the integrated amplifier Before connecting power UnpackingTo position the integrated amplifier Radio interferenceConnecting the integrated amplifier Back panelAudio connections Con To connect to a tape recorderTo connect to other Meridian 500 Series equipment NCon To connect to A500 LoudspeakersTo connect to Meridian 600 or 200 Series equipment Troubleshooting No lights are displayed when switching onSound has cut out and the display shows DC Sound has cut out and the display shows HotThere is hum on the LP input There is hum on other inputsMaintenance CleaningTo clean the case, display panel, and keypad To clean the audio connectionsService and guarantee ServiceGuarantee Cleaning IndexSound restoring Index