Napoleon Grills PTH31GT manual Front

Page 12

26

1.

7 X (M5 X 8mm)

Disassemble the control box (2) from the plate cover (7) and the middle plate (1) by removing the (M5 x 8mm) screws (17). These parts were assembled at the factory to protect the parts during shipping.

Désassemblez le boîtier de contrôle (2) et le couvercle de plaque (7) de la plaque centrale (1) en retirant les vis (M5 x 8 mm) (17). Ces pièces ont été assemblées en usine pour éviter qu’elles soient endommagées lors de l’expédition.

Control box removal is not required. For step 2, use the short Philips screwdriver (supplied) to assemble the lower supports.

L’enlèvement du boîtier de contrôle n’est pas requis. Pour l’étape 2, utilisez le tournevis Phillips (fourni) pour assembler les supports inférieurs.

2.

16 X (M5 X 8mm)

Assemble the four lower supports (4) to the bottom plate (3) and middle plate (1) using the (M5 x 8mm) screws (17).

Fixez les quatre pattes inférieures (4) aux plaques inférieure (3) et centrale (1), à l’aide de vis (M5 x 8 mm) (17).

FRONT

www.napoleongrills.com

Image 12
Contents Bellagio Commercial GAS Patio Torch PTH31GT Napoleon Patio Torch Presidents Warranty Conditions And LimitationsSafe Operating Practices Propane Cylinder Specifications General InformationGas Hook-Up Instructions Page Leak Testing Instructions Lighting Instructions Lighting HolesOperating The Patio Torch Maintenance / Cleaning Instructions Troubleshooting Problem Possible Causes SolutionGetting Started Pour CommencerFront 16 X M5 X M5 X Silicone ring must be in place prior to operating the torch 12 X M5 X Rubber Bushing Anneau DE Protection EN Caoutchouc Leak Testing Instructions Parts List Item # Description Qty Picture CommentsParts List Ordering Replacement Parts Warranty InformationAccessories & Parts Order Form