MTD 22K, 18K, 16K manual Hedge Trimmer Safety Rules

Page 5

RULES FOR SAFE OPERATION

13.STAY ALERT, WATCH WHAT YOU ARE DOING AND USE COMMON SENSE WHEN OPERATING A POWER TOOL. Do not use tools while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

14.AVOID UNINTENTIONAL STARTING. Do not move plugged-in appliance with finger on switch. Be sure switch is off when plugging in.

15.DO NOT OVERREACH. Keep proper footing and bal- ance at all times. Proper footing and balance enables better control of the tool in unexpected conditions.

16.NO ACCESSORIES OR ATTACHMENTS ARE NECESSARY FOR THE OPERATION OF THIS GARDENING TOOL. The use of any accessories or attachments for this gardening tool is not recom- mended. Such use of any attachment or accessory may increase the risk of injury to the user.

17.DO NOT FORCE TOOL. The correct tools will do the job better and safer at the rate for which it is designed.

18.DISCONNECT THE PLUG FROM THE POWER SOURCE BEFORE MAKING ANY ADJUSTMENT, CHANGING ACCESSORIES, OR STORING THE TOOL. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.STORE IDLE TOOLS INDOORS. When not in use, tools should be stored indoors in dry, and high or locked-up place, out of reach of children.

20.MAINTAIN TOOLS WITH CARE. Keep cutting tools sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect tool cord periodi- cally, and if damaged, have it repaired by an author- ized service facility. Keep handling surface dry, clean, and free from oil and grease.

21.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be prop- erly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.

HEDGE TRIMMER SAFETY RULES:

1.The hedge trimmer must not be used by anyone under the age 16.

2.Keep children, other people and pets away from the trimmer.

3.Always dress properly. Don’t wear loose clothing or jewelry; they can be caught in moving parts. Use of

rubber gloves and substantial footwear is recom- mended when working outdoors. Wear protective hair covering to contain long hair.

4.Use face or dust mask if operation is dusty.

5.Do not use the trimmer if the cutting devices is not secured properly or is damaged.

6.Before starting the trimmer, make sure that the cut- ting blade is not touching stones or debris.

7.When the trimmer is in operation, keep the cutting section away from all parts of the body.

8.Do not cut against hard objects, This could injury or damage the trimmer.

9.Only cut during broad daylight or with corresponding artificial light.

10.Don’t abuse cord, never carry hedge trimmer by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

11.When the trimmer is not in use, store it in a dry place and out of the reach of children.

12.The outlet voltage must correspond to the one marked on the technical data plate. Do not use other sources of power.

13.Never use the trimmer when it is raining. Try to pre- vent it from getting wet or being exposed to humidi- ty. Do not leave it outside overnight. Do not cut damp or wet bushes.

14.The power supply cable should be checked regular- ly. Before each use, make sure cable is not dam- aged or worn. If the cable is not in good condition, do not use the trimmer. Take it to an authorized service center for proper repair.

15.Only use an extension cord which is suitable for outdoor work. Keep it away from the cutting area, damp, wet or oily surfaces, or sharp edges. Keep away from heat and fuels.

16.Avoid unintentional starting. Don’t carry plugged in hedge trimmer with fingers on both switches. Be sure switch is off when plugging in.

17.Do not attempt to remove cut material or hold mate- rial to be cut when blades are moving. Make sure trimmer switch is off when clearing jammed material from blades. Do not grasp the exposed cutting blades or cutting edges when picking up or holding the hedge trimmer.

18.Don’t force hedge trimmer, it will do the job better and with less likelihood of risk of injury at the rate for which it was designed.

4

Image 5
Contents MTD16K MTD18K MTD22K Operator’s ManualWarranty Statement Table of ContentsSymbol Meaning Important Safety InstructionsRules for Safe Operation Before OperatingPlease Read Save These Instructions Hedge Trimmer Safety Rules Warranty Symbol Wear HEAD, EYE and Hearing Protection Safety Alert SymbolKnow Your Unit Installing Safety Guard FIG Assembly InstructionsSwitch Power CordTrimming Instructions Blade Lubrication Maintenance InstructionsSpecifications Parts No Description Parts ListPage MTD LLC Manual de Utilisation Declaration DE Garantie Table DES MatièresImportantes Consignes DE Sécurité Alerte DE SécuritéRègles DE Sécurité SI Vous Avez DES QUESTIONS, Appelez LELire ET Conserver CES Instructions AvertissementMesures DE Securite DU TAILLE-HAIE Porter DES Vêtements AppropriésConserver CES Instrucions Sécurité Symboles DE Sécurité ET InternationauxFAMILIARISEZ-VOUS Avec Votre Appareil Assemblage Installer LA Plaque DE Securite FIGInstructions D’UTILISATION InterrupteurInstruction DU TAILLE-HAIE Lubrifier LA Lame MaintenanceSpécifications Référence Descrip tion Liste DES PiècesRemarque Garantie Limitée DU Fabricant Pour Manuel del Dueño/Operador Declaración DE Garantía ÍndiceNormas DE Seguridad Instrucciones Importantes DE SeguridadSI Tiene Alguna PREGUNTA, Llame AL Símbolo SignificadoFavor DE Leer Conserve Estas Instrucciones AdvertenciaRegles DE Seguridad DEL Cortador DE Setos Explicacion DE NOTA, Advertencia Y Simbolo DE Garantia Utilice Protección Para OJOS, Oídos Y Cabeza Símbolo Alerta DE SeguridadLEA EL Manual DEL Usuario Conozca SU Bordeadora DE Césped Ensamblaje PrecauctionInstrucciones DE Operacion InterruptorInstrucciones DE LA Bordeadora Lubricación DE LAS Cuchillas MantenimientoEspecificaciones ˚ de Pieza Descripción Lista DE PiezasNota MTD LLC Page Stop

22K, 16K, 18K specifications

MTD (Micro Technology Development) has established itself as a notable innovator in the field of precision machines with its range of models including the MTD 16K, 18K, and 22K. These powerful machines stand out for their advanced features, cutting-edge technologies, and high-performance characteristics that cater to diverse industrial applications.

The MTD 16K model is renowned for its compact design and robust construction, making it suitable for various tasks, including milling, drilling, and turning. Equipped with a high-speed spindle, it allows for quick and efficient processing of materials, ensuring shorter production cycles. The user-friendly interface enhances operational efficiency, while the machine's energy-efficient operation contributes to reduced operational costs.

Moving up the range, the MTD 18K integrates enhanced automation capabilities. This model boasts an impressive array of smart technologies, including real-time monitoring systems and data analytics tools. These features help track performance metrics and machine health, thus allowing for predictive maintenance. The sophisticated cooling system ensures optimal thermal stability, enhancing the machine's longevity and performance consistency even under sustained use.

At the top of the line, the MTD 22K embodies reliability and top-tier performance. This advanced machine can handle a wider range of materials and complexities in manufacturing. Its significant horsepower and torque enable it to manage heavy-duty tasks with precision and speed. The MTD 22K includes selective precision machining technology, which allows operators to customize their approaches depending on the material and desired output. With advanced safety features, including emergency shutdown systems and protective enclosures, it ensures a secure working environment.

All three models are designed with user-centric ergonomics, allowing for ease of access and operation while maintaining the highest production standards. MTD's commitment to continuous improvement ensures that each iteration incorporates feedback from users, enabling constant evolution.

In summary, the MTD 16K, 18K, and 22K represent the pinnacle of modern machinery, characterized by their innovative technologies, versatile functionalities, and an unwavering focus on efficiency and safety in manufacturing processes. Whether achieving rapid production cycles or handling intricate designs, MTD machines are equipped to meet the demands of today's dynamic industrial landscape.