Neuton EM 5.1 manual Remove the Battery, Charge the Battery Before Your First Use

Step 2: Remove the Battery

You can quickly and easily remove the battery from your Mower.

1.	Open the battery cover (Figure 2).
Remember to press down on the Mower body
next to the battery cover handle before pulling
the cover open.
2.	Turn the battery retainer arm until it is no	Figure 2. Lift the battery cover
	longer blocking the battery (Figure 3).

To help keep the Mower from rolling while removing the battery, put one foot behind a wheel for stability.

3. Pull the battery straight up to remove it.

Step 3: Charge the Battery Before Your First Use

You MUST charge the battery for 12 hours before you use the Mower for the first time. If you do not charge it before using the Mower, the battery’s charging capacity may decrease.

For instructions on removing and charging the battery, read “Chapter 5: Charging and Caring for the Battery” before you operate the mower.

Figure 3. Turn the battery retainer arm

Step 4: Attach the Lower

Handlebar Sections

To keep the Mower from moving while you assemble it, put a foot behind one of the wheels.

Use the green quick-connect knobs to attach the lower handlebar sections to the Mower. You install both handlebars the same way.

1.Set the cutting height lever to the highest adjustment: position 6 as molded into the

Figure 4. Set cutting height to position 6 (Note: position numbers have been highlighted for clarity)

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions 13