Neuton EM 5.1 manual Indicator Light, Cutting Height Lever, Mower/Auxiliary Switch

Page 24

Indicator Light

The status indicator light on the lower crossbar (Figure 15) lights up when a charged battery is installed and the safety key inserted. The light is green.

Note: A green indicator light does not guarantee that the battery is fully charged, only that it has some charge, the safety key has been inserted, that the electrical system is ready, and that the Mower can be started.

Indicator light

Figure 15. Green indicator light

WARNING! If the green indicator light goes out, do not operate the Mower again until the battery is fully charged; otherwise the battery’s charging capacity might be decreased.

Note: Although you may notice that a short period of rest may restore the indicator light, you must still fully charge the battery before continuing to mow. For best results, be sure to always fully charge the battery after every use.

Cutting Height Lever

The cutting height lever (Figure 16) allows you to easily adjust how high or low you cut the grass. Notice that there are six different height positions etched into the Mower’s body.

To easily move the cutting height lever, hold the handlebars with your right hand to keep the Mower steady and adjust the lever with your left hand.

To easily adjust this lever, pull the lever out before lifting or lowering it. Once you pull it out, it very easily adjusts to a different level.

Mower/Auxiliary Switch

The Mower/Auxiliary switch (Figure 17) controls the optional Mower attachments. This switch has two settings:

•Mower, used for normal mowing.

•Auxiliary, used when operating an attachment.For more information about options available for your NEUTON Mower, see “Chapter 6: Optional Attachments.”

Figure 16. Cutting height lever

Figure 17. Pushing the Mower/Auxiliary switch to the Auxiliary setting

20

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Cordless Electric Mower Safety Operating Instructions Smart Mower for Small Lawns Table of Contents Neuton Mower Product Specifications Introducing the Neuton Mower EM About this ManualConventions used in this manual Important Safety Considerations Safety and Information LabelsFollowing label appears on your Neuton Battery Protecting Yourself and Those Around You Dressing AppropriatelyPreparing to Use Your Mower Operating Your Mower Mowing on Slopes Servicing Your MowerHandling the Battery Safely Maintaining and Storing Your MowerSetting Up Your Neuton Mower Neuton Mower Package ChecklistPackage Contents Figure Read the Safety and Operating Instructions Before Proceeding Assembling Your Neuton MowerRemove the Battery Charge the Battery Before Your First UseAttach the Lower Handlebar Sections Attach the Upper Handlebar Assembly Slide the handlebar fully into the slot on the MowerAttach the Cable to the Handlebar Assembly Cord clip on the lower rightAttach the Side Discharge Chute or Rear Bagger Rear BaggerInsert the Battery After It Has Been Fully Charged Your Fully Assembled Neuton Mower Your Neuton MowerControls and Features Safety KeyKey Slot Start KnobIndicator Light Mower/Auxiliary SwitchCutting Height Lever Operating Your Neuton Mower Pre-Start ChecksAdjusting the Cutting Height Cutting height lever set to leave your grass 1.6 inches highStarting the Motor and Engaging the Blade Starting the MowerWhen Finished Mowing Stopping the Motor and BladeMowing and Lawn Care Tips Charging and Caring for the Battery BatteryCharging the Battery Charging the Battery MowerCharging with the Battery Removed from the Mower Disconnecting the ChargerRecharging After Each Use of the Mower Caring for the Battery Storage Temperature RangeRecharging to a Full Charge for Off-Season Storage Recycling your Used Battery InmetcoOptional Attachments Neuton TrimmerNeuton Mulching Kit Installing the Mulching Kit Installing the mulching plugSpare Battery Utility ShelfCleaning Your Mower Maintaining and Storing Your Neuton MowerRemoving and Attaching the Blade Sharpening the Blade Sharpening the Blade in a ViseBalancing the Blade Lubricating Your MowerStoring Your Neuton Mower Troubleshooting Tips Problem Corrective ActionProblem Corrective Action Addendum a Parts List and Schematic Drawing Upper Mower Housing BHandlebar Set a Deck & Motor Assembly C Wheel Assemblies D Rear Bagger Set EBattery Set F Label Set GPage Schematic Drawings Page Neuton Mower Product Specifications Terms and Conditions Technical Support HotlineDaily Checklist for your Neuton Mower

EM 5.1 specifications

The Neuton EM 5.1 is an innovative addition to the realm of electric mowers, designed specifically for homeowners seeking efficiency and sustainability in their lawn care. As a lightweight yet powerful machine, it provides an eco-friendly alternative to traditional gas-powered mowers, combining cutting-edge technologies with user-friendly features.

One of the standout characteristics of the Neuton EM 5.1 is its robust, rechargeable battery system. Equipped with a high-capacity 24-volt battery, it offers long run times that can accommodate medium to large lawns on a single charge. The quick-charging capability ensures minimal downtime, allowing users to easily manage their mowing schedules. Additionally, the mower's battery-powered design minimizes fumes and noise, promoting a more pleasant mowing experience for both the user and the surrounding environment.

The EM 5.1 features a unique, 19-inch cutting deck made from durable materials that ensure long-lasting use. Its precision steel blades provide a clean cut on various types of grass, contributing to a healthy lawn. The mower also offers a versatile cutting height adjustment, allowing users to select the desired height with ease, ensuring optimal grass length for aesthetic appeal and lawn health.

Another significant technology utilized in the Neuton EM 5.1 is its self-propulsion feature. This system makes it easier to maneuver across different terrains, eliminating the physical strain associated with pushing a traditional mower. Users can enjoy the benefits of an efficient mowing process while maintaining comfort and control.

Moreover, the EM 5.1 incorporates an easy-to-use folding design, allowing for convenient storage and transport. This space-saving feature is particularly advantageous for those with limited storage options. The mower also includes an integrated mulching function, enabling users to recycle grass clippings back into the lawn, further enhancing its ecological benefits.

In summary, the Neuton EM 5.1 electric mower masterfully combines power, precision, and convenience. With its advanced battery technology, durable construction, and adaptive mowing features, it stands out as a smart choice for environmentally conscious homeowners looking to maintain their lawns effectively. As sustainability takes center stage in modern gardening, the Neuton EM 5.1 represents an ideal balance of performance and environmental responsibility.
Top Page Image Contents