Neuton Essential Troubleshooting Tips for Your Mower
Page 41

Chapter 8: Troubleshooting Tips

Most difficulties are easy to fix. Consult the troubleshooting table for common problems and their solutions. If you continue to experience problems or need repairs beyond these minor adjustments, call Country Home Products, Inc. toll free at 1-(866)-NEUTON1 (638-8661) for assistance.

WARNING! Always remove the safety key and battery before performing any adjustments, maintenance, or repairs.

Problem

Corrective Action

 

 

Motor fails to start

• Check to make sure the safety key is properly inserted and the

when safety key is

indicator light is on. Check to see if the white button on the safety

inserted, and control

key has popped up; if it has, then depress the button to reset it.

bar is depressed

• Check that the battery is installed correctly and that the battery is

 

 

fully charged. The green indicator light on the Mower should be on.

 

If not, replace with a fully charged battery or recharge the battery.

 

Check the cable to make sure it is attached and properly connected.

 

• Check to make sure the Mower/Auxiliary Switch is set to the correct

 

position.

 

• Make sure you follow the correct starting sequence of sliding the

 

orange start knob to the left and squeezing the orange control bar.

 

• The blade may be obstructed. Remove the safety key and battery,

 

turn the Mower over, and check the blade.

 

 

 

 

Mower stops while mowing (for reasons other than releasing the control bar)

•The battery has been completely depleted. Recharge the battery fully or replace it with a fully charged battery.

•The Mower may be overloaded. If the indicator light is out, the circuit breaker inside the safety key has cut off power to protect the motor. Reinsert the safety key, reset the white button, and restart the Mower.

•The grass may be too high for the cutting height. Raise the cutting height or narrow your cutting swath and try again.

The blade, mower deck, or rear discharge plate may be clogged with debris. Remove the safety key and battery, turn the Mower over, and check below the deck. Clean if necessary.

•The white safety button on the safety key may not be fully engaged. Reset it and try again.

•If the Mower bogs down or stalls in heavy grass:

Raise the height of Mower.

Walk more slowly.

Cut a narrower swath.

If the grass is wet, let it dry.

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions

37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Cordless Electric Mower Safety Operating Instructions Smart Mower for Small Lawns Table of Contents Neuton Mower Product Specifications About this Manual Introducing the Neuton Mower EMConventions used in this manual Safety and Information Labels Important Safety ConsiderationsFollowing label appears on your Neuton Battery Dressing Appropriately Protecting Yourself and Those Around YouPreparing to Use Your Mower Operating Your Mower Servicing Your Mower Mowing on SlopesMaintaining and Storing Your Mower Handling the Battery SafelyNeuton Mower Package Checklist Setting Up Your Neuton MowerPackage Contents Figure Assembling Your Neuton Mower Read the Safety and Operating Instructions Before ProceedingAttach the Lower Handlebar Sections Remove the BatteryCharge the Battery Before Your First Use Slide the handlebar fully into the slot on the Mower Attach the Upper Handlebar AssemblyCord clip on the lower right Attach the Cable to the Handlebar AssemblyRear Bagger Attach the Side Discharge Chute or Rear BaggerInsert the Battery After It Has Been Fully Charged Your Neuton Mower Your Fully Assembled Neuton MowerSafety Key Controls and FeaturesKey Slot Start KnobCutting Height Lever Indicator LightMower/Auxiliary Switch Pre-Start Checks Operating Your Neuton MowerCutting height lever set to leave your grass 1.6 inches high Adjusting the Cutting HeightStarting the Mower Starting the Motor and Engaging the BladeMowing and Lawn Care Tips When Finished MowingStopping the Motor and Blade Battery Charging and Caring for the BatteryCharging the Battery Mower Charging the BatteryRecharging After Each Use of the Mower Charging with the Battery Removed from the MowerDisconnecting the Charger Recharging to a Full Charge for Off-Season Storage Caring for the BatteryStorage Temperature Range Inmetco Recycling your Used BatteryNeuton Mulching Kit Optional AttachmentsNeuton Trimmer Installing the mulching plug Installing the Mulching KitUtility Shelf Spare BatteryRemoving and Attaching the Blade Cleaning Your MowerMaintaining and Storing Your Neuton Mower Sharpening the Blade in a Vise Sharpening the BladeLubricating Your Mower Balancing the BladeStoring Your Neuton Mower Problem Corrective Action Troubleshooting TipsProblem Corrective Action Handlebar Set a Addendum a Parts List and Schematic DrawingUpper Mower Housing B Deck & Motor Assembly C Rear Bagger Set E Wheel Assemblies DLabel Set G Battery Set FPage Schematic Drawings Page Neuton Mower Product Specifications Technical Support Hotline Terms and ConditionsDaily Checklist for your Neuton Mower

EM 5.1 specifications

The Neuton EM 5.1 is an innovative addition to the realm of electric mowers, designed specifically for homeowners seeking efficiency and sustainability in their lawn care. As a lightweight yet powerful machine, it provides an eco-friendly alternative to traditional gas-powered mowers, combining cutting-edge technologies with user-friendly features.

One of the standout characteristics of the Neuton EM 5.1 is its robust, rechargeable battery system. Equipped with a high-capacity 24-volt battery, it offers long run times that can accommodate medium to large lawns on a single charge. The quick-charging capability ensures minimal downtime, allowing users to easily manage their mowing schedules. Additionally, the mower's battery-powered design minimizes fumes and noise, promoting a more pleasant mowing experience for both the user and the surrounding environment.

The EM 5.1 features a unique, 19-inch cutting deck made from durable materials that ensure long-lasting use. Its precision steel blades provide a clean cut on various types of grass, contributing to a healthy lawn. The mower also offers a versatile cutting height adjustment, allowing users to select the desired height with ease, ensuring optimal grass length for aesthetic appeal and lawn health.

Another significant technology utilized in the Neuton EM 5.1 is its self-propulsion feature. This system makes it easier to maneuver across different terrains, eliminating the physical strain associated with pushing a traditional mower. Users can enjoy the benefits of an efficient mowing process while maintaining comfort and control.

Moreover, the EM 5.1 incorporates an easy-to-use folding design, allowing for convenient storage and transport. This space-saving feature is particularly advantageous for those with limited storage options. The mower also includes an integrated mulching function, enabling users to recycle grass clippings back into the lawn, further enhancing its ecological benefits.

In summary, the Neuton EM 5.1 electric mower masterfully combines power, precision, and convenience. With its advanced battery technology, durable construction, and adaptive mowing features, it stands out as a smart choice for environmentally conscious homeowners looking to maintain their lawns effectively. As sustainability takes center stage in modern gardening, the Neuton EM 5.1 represents an ideal balance of performance and environmental responsibility.
Top Page Image Contents