Neuton EM 5.1 manual Insert the Battery After It Has Been Fully Charged

Page 21

Step 8: Insert the Battery After It Has Been Fully Charged

1.Correctly orient the battery. Align the black edge of the battery with the side of the housing where the label reads “Insert battery with black side along this edge.”

The indentations on the bottom of the battery must line up with the metal tabs in the bottom of the housing.

2.After confirming the correct orientation of the battery, insert the battery into the battery opening (Figure 13).

3.Turn the battery retainer arm back on top of the battery to secure it.

Important: If the battery is not oriented correctly, it will not fully depress into the opening. If this happens, remove the battery,

recheck the orientation, and try again.

Label

Figure 13. Orient and insert the battery

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions

17

Image 21

Contents Cordless Electric Mower Safety Operating Instructions Smart Mower for Small Lawns Table of Contents Neuton Mower Product Specifications About this Manual Introducing the Neuton Mower EMConventions used in this manual Safety and Information Labels Important Safety ConsiderationsFollowing label appears on your Neuton Battery Dressing Appropriately Protecting Yourself and Those Around YouPreparing to Use Your Mower Operating Your Mower Servicing Your Mower Mowing on SlopesMaintaining and Storing Your Mower Handling the Battery SafelyNeuton Mower Package Checklist Setting Up Your Neuton MowerPackage Contents Figure Assembling Your Neuton Mower Read the Safety and Operating Instructions Before ProceedingRemove the Battery Charge the Battery Before Your First UseAttach the Lower Handlebar Sections Slide the handlebar fully into the slot on the Mower Attach the Upper Handlebar AssemblyCord clip on the lower right Attach the Cable to the Handlebar AssemblyRear Bagger Attach the Side Discharge Chute or Rear BaggerInsert the Battery After It Has Been Fully Charged Your Neuton Mower Your Fully Assembled Neuton MowerSafety Key Controls and FeaturesKey Slot Start KnobIndicator Light Mower/Auxiliary SwitchCutting Height Lever Pre-Start Checks Operating Your Neuton MowerCutting height lever set to leave your grass 1.6 inches high Adjusting the Cutting HeightStarting the Mower Starting the Motor and Engaging the BladeWhen Finished Mowing Stopping the Motor and BladeMowing and Lawn Care Tips Battery Charging and Caring for the BatteryCharging the Battery Mower Charging the BatteryCharging with the Battery Removed from the Mower Disconnecting the ChargerRecharging After Each Use of the Mower Caring for the Battery Storage Temperature RangeRecharging to a Full Charge for Off-Season Storage Inmetco Recycling your Used BatteryOptional Attachments Neuton TrimmerNeuton Mulching Kit Installing the mulching plug Installing the Mulching KitUtility Shelf Spare BatteryCleaning Your Mower Maintaining and Storing Your Neuton MowerRemoving and Attaching the Blade Sharpening the Blade in a Vise Sharpening the BladeLubricating Your Mower Balancing the BladeStoring Your Neuton Mower Problem Corrective Action Troubleshooting TipsProblem Corrective Action Addendum a Parts List and Schematic Drawing Upper Mower Housing BHandlebar Set a Deck & Motor Assembly C Rear Bagger Set E Wheel Assemblies DLabel Set G Battery Set FPage Schematic Drawings Page Neuton Mower Product Specifications Technical Support Hotline Terms and ConditionsDaily Checklist for your Neuton Mower