Neuton EM 5.1 manual Maintaining and Storing Your Neuton Mower, Cleaning Your Mower

Page 37

Chapter 7: Maintaining and Storing Your

NEUTON Mower

This chapter explains how to clean your Mower; change, sharpen, and balance blades; and store your Mower for the long-term.

WARNING! ALWAYS remove the safety key and battery before performing any adjustments, maintenance, blade change, or repairs to your Mower.

Cleaning Your Mower

Periodically clean your Mower to ensure peak performance.

Supplies needed:

•Clean, damp cloth or sponge

•Mild soap or detergent (if needed)

•Soft nylon brush (if needed)

1.Remove the safety key and battery.

2.Using a damp cloth or sponge with a mild soap or detergent, clean the Mower. Never use water, gasoline, solvents, or other petroleum-based or solvent-based products when cleaning — remember, this is an electric mower.

3.Use a soft nylon brush or non-metallic scrubbing pad to remove any clippings that have accumulated on the underside of the deck and in the rear discharge plate. Do not use a wire brush; it will scratch and harm the surface of your Mower.

4.You may use water to clean the rear bagger, but not the Mower itself. For proper grass collection, make sure the grass bag is clean and the mesh holes are not clogged. Allow the Rear Bagger to dry thoroughly before using it again.

Note: A wet Rear Bagger will clog quickly and hamper grass collection.

Removing and Attaching the Blade

You must remove the blade to sharpen it, or to change to a different blade.

Always check the blade for sharpness, damage, and tightness before and after each use. Replace the blade promptly if it has been bent or damaged.

Tools & supplies needed:

•36 mm wrench (supplied with Mower)

•¾ inch socket or adjustable wrench

•Gloves or rag to protect your hands

Wear heavy gloves to protect your hands when removing and attaching blades.

1.Remove the safety key and the battery. If you are charging the battery, first disconnect the charger from the electrical (wall) outlet.

2.While holding the handlebars (as if you are mowing), turn the Mower over on its right side to expose the blade.

3.Place the 36 mm wrench over the steel hex adapter holding the blade (the large metal piece that holds the blade in position).

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Cordless Electric Mower Safety Operating Instructions Smart Mower for Small Lawns Table of Contents Neuton Mower Product Specifications About this Manual Introducing the Neuton Mower EMConventions used in this manual Safety and Information Labels Important Safety ConsiderationsFollowing label appears on your Neuton Battery Dressing Appropriately Protecting Yourself and Those Around YouPreparing to Use Your Mower Operating Your Mower Servicing Your Mower Mowing on SlopesMaintaining and Storing Your Mower Handling the Battery SafelyNeuton Mower Package Checklist Setting Up Your Neuton MowerPackage Contents Figure Assembling Your Neuton Mower Read the Safety and Operating Instructions Before ProceedingCharge the Battery Before Your First Use Remove the BatteryAttach the Lower Handlebar Sections Slide the handlebar fully into the slot on the Mower Attach the Upper Handlebar AssemblyCord clip on the lower right Attach the Cable to the Handlebar AssemblyRear Bagger Attach the Side Discharge Chute or Rear BaggerInsert the Battery After It Has Been Fully Charged Your Neuton Mower Your Fully Assembled Neuton MowerSafety Key Controls and FeaturesKey Slot Start KnobMower/Auxiliary Switch Indicator LightCutting Height Lever Pre-Start Checks Operating Your Neuton MowerCutting height lever set to leave your grass 1.6 inches high Adjusting the Cutting HeightStarting the Mower Starting the Motor and Engaging the BladeStopping the Motor and Blade When Finished MowingMowing and Lawn Care Tips Battery Charging and Caring for the BatteryCharging the Battery Mower Charging the BatteryDisconnecting the Charger Charging with the Battery Removed from the MowerRecharging After Each Use of the Mower Storage Temperature Range Caring for the BatteryRecharging to a Full Charge for Off-Season Storage Inmetco Recycling your Used BatteryNeuton Trimmer Optional AttachmentsNeuton Mulching Kit Installing the mulching plug Installing the Mulching KitUtility Shelf Spare BatteryMaintaining and Storing Your Neuton Mower Cleaning Your MowerRemoving and Attaching the Blade Sharpening the Blade in a Vise Sharpening the BladeLubricating Your Mower Balancing the BladeStoring Your Neuton Mower Problem Corrective Action Troubleshooting TipsProblem Corrective Action Upper Mower Housing B Addendum a Parts List and Schematic DrawingHandlebar Set a Deck & Motor Assembly C Rear Bagger Set E Wheel Assemblies DLabel Set G Battery Set FPage Schematic Drawings Page Neuton Mower Product Specifications Technical Support Hotline Terms and ConditionsDaily Checklist for your Neuton Mower

EM 5.1 specifications

The Neuton EM 5.1 is an innovative addition to the realm of electric mowers, designed specifically for homeowners seeking efficiency and sustainability in their lawn care. As a lightweight yet powerful machine, it provides an eco-friendly alternative to traditional gas-powered mowers, combining cutting-edge technologies with user-friendly features.

One of the standout characteristics of the Neuton EM 5.1 is its robust, rechargeable battery system. Equipped with a high-capacity 24-volt battery, it offers long run times that can accommodate medium to large lawns on a single charge. The quick-charging capability ensures minimal downtime, allowing users to easily manage their mowing schedules. Additionally, the mower's battery-powered design minimizes fumes and noise, promoting a more pleasant mowing experience for both the user and the surrounding environment.

The EM 5.1 features a unique, 19-inch cutting deck made from durable materials that ensure long-lasting use. Its precision steel blades provide a clean cut on various types of grass, contributing to a healthy lawn. The mower also offers a versatile cutting height adjustment, allowing users to select the desired height with ease, ensuring optimal grass length for aesthetic appeal and lawn health.

Another significant technology utilized in the Neuton EM 5.1 is its self-propulsion feature. This system makes it easier to maneuver across different terrains, eliminating the physical strain associated with pushing a traditional mower. Users can enjoy the benefits of an efficient mowing process while maintaining comfort and control.

Moreover, the EM 5.1 incorporates an easy-to-use folding design, allowing for convenient storage and transport. This space-saving feature is particularly advantageous for those with limited storage options. The mower also includes an integrated mulching function, enabling users to recycle grass clippings back into the lawn, further enhancing its ecological benefits.

In summary, the Neuton EM 5.1 electric mower masterfully combines power, precision, and convenience. With its advanced battery technology, durable construction, and adaptive mowing features, it stands out as a smart choice for environmentally conscious homeowners looking to maintain their lawns effectively. As sustainability takes center stage in modern gardening, the Neuton EM 5.1 represents an ideal balance of performance and environmental responsibility.
Top Page Image Contents